曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
page will appear.
You can either enter a specific airport code in the REF AIRPORT or you can press the LSK next to the REF
AIRPORT line and the CDU will detect the current airport from MSFS. The LAT and LONG will appear
opposite. Select the LSK to bring the new LAT and LONG into the Scratch Pad. Then press the LSK next to
SET IRS POS and the new LAT and LONG will be taken into the IRS position and set. Now the CDU will
have a fix and the Glass Cockpit display warning flag indicators ATT and MAP will disappear.
Project Magenta Revision: 12 March-08
33
Step 4 Additional Settings CDU
The CDU has additional settings that can be selected from the settings page. The following are required to
be set for your own preference. This only needs to be done once unless you decide to change these
options at a later date.
• Auto Tune NAVS, this will tune the NAV radios automatically, this can be a ON / OFF selection
• FAF, the range of the Final Approach Fix can be entered here
• MIN AGL LNAV, the minimum altitude for LNAV engagement
• TIME, select either system or MSFS Zulu time
• MESSAGES, this will turn on or off messages that the FMC produces in the Scratch Pad
• QNH, select your preference
• FUEL, select your preference
• PREFLIGHT, if set to on will require a full Pre-Flight Set-up of the CDU
• FLUSH, will flush all data from the CDU after the aircraft has landed or upon each re-start of the
CDU.
The CDU is now in a basic configuration for use.
Other user settings that can be select are self explanatory:
• NAV/COM/XPDR, you can enter radio frequencies
• EFIS selectors can alter GC displays via the CDU
• SPD PROTECT, artificial simulated flap and speed protection
• EXTRAS, simulator rate and freeze modes
If you require to reset or gather information about your current NETDIR status, this can be done by going
to the INDEX page of the CDU, and selecting MAINT. Then select the NETDIR option.
Project Magenta Revision: 12 March-08
34
Step 5 Flare Altitude CDU
If running the CDU the flare altitude must be set. If you do not change a/c types then this only needs to be
set once. The flare altitude will determine at what point on an Auto Land the aircraft will start the Flare.
The flare altitude will probably be set at 30 by default; you may want to change this value depending on
what a/c type you are using.
From the INDEX page select MAINT. From this page select the LSK for A/T. In the A/T page if you want to
assign a new flare value, enter it into the scratch pad, and then enter this value by pressing the LSK next to
the FLARE AGL setting. The new value will be added.
Project Magenta Revision: 12 March-08
35
CDU.INI settings
Update: Please check the CDU.INI file for updated information.
There are various items you can customize both within the program and in the program's Initialization file,
CDU.INI; here are some samples of the settings which can be made.
[DISPLAY]
Title=On Sets Title Bar Display on Startup On/Off (see Ctrl-W key below)
WindowName=COMPUTER1 Interesting for EPIC programmers who want to send Keyboard
Commands to a specific window...
TopMost=Off Changing this option to Topmost=On will force the system to keep the
CDU as the topmost window. You can switch to other tasks, such as FS
(if it is running on the same system), but they won't be visible if the PFD
is running full screen, or the PFD will "hide" programs behind it. This
command can be used when you want to set the focus to another
program or when you are running the PFD in a windowed mode and you
want to have it always on top. As an example, you can start FS98,
minimize it, and run the PFD maximized and then press Alt-Tab and
select FS98/FS2000. You can now run the sim, but the PFD stays on top.
You now have a pure IFR simulator.
FSWindow=Off When you set FSWindow=On the CDU Cockpit will look for the Flight
Simulator and become part of that window, i.e. it is maximized and
minimized together with FS. This is only interesting for One PC operation.
FSFocus=Off When you use FSWindow=On you can force the focus back to FS every
time you have clicked on a key within the CDU.
[Network]
DisableAutoNetDir=
=On disables the automatic creation of the NetDir= entry by the CDU,
when it is enabled, you can allow the CDU to force the NetDir onto the
other programs by going to the INIT REF : MAINT : NETDIR menu.
NetDir= Network directory that will be used for the exchange of files between the
PFD/ND, the MCP and the CDU. Entries could be NetDir=E:\Data\
NetDir=\\SERVER1\C\, please check the correct path on your
system.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
Project Magenta USER MANUAL Revision: 12 March-08(12)
