曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
Examples
C/48N050W/M082F290F350;
C/48N050W/M082F290PLUS;
3.10 Field 16: Destination Aerodrome and Total Estimated Elapsed Time, Alternate Aerodrome(s)
Destination Aerodrome and Time (8 characters)
Insert the ICAO four-letter location indicator of the destination aerodrome followed, WITHOUT A SPACE, by the total estimated elapsed time,
OR
If no location indicator has been assigned, insert ZZZZ followed, WITHOUT A SPACE, by the total estimated elapsed time, and specify in Item 18 the name of the aerodrome preceded by DEST/.
Notes:
a) Total Estimated Elapsed Time
i) For IFR flights this is the total estimated time from take-off until arriving over the designated point from which it is intended that an Instrument Approach Procedure, defined by reference to navigation aids, will commence, or, if no navigation aid is associated with the destination aerodrome, until arriving over the destination aerodrome itself.
ii) For VFR flights this is the total estimated time from take-off until arriving over the destination aerodrome.
b) For a flight plan received from an aircraft in flight, total estimated elapsed time starts from the first point of the route to which the flight plan applies.
Alternate Aerodrome(s) (4 characters)
Insert the ICAO four-letter location indicator(s) of not more than two alternate aerodromes, SEPARATED BY A SPACE.
OR
If no location indicator has been assigned to an alternate aerodrome insert ZZZZ and specify in Item 18 the name of the aerodrome preceded by ALTN/.
NORTH ATLANTIC MNPSA OPERATIONS MANUAL ATTACHMENT 4
NAT MNPS 113 Edition 2009
Common Errors:
The use of spurious names for unnamed fixes (typically extracted from navigation data bases) is to be avoided. In addition to being undefined the names fail to adhere to the format specified for fixes (five alphabetical characters) and so cause a syntax error in addition to the logical error. ARINC 424 type position reports are not to be used.
When specifying speeds in knots a leading zero is required if the speed is less than 1000 knots.
No blank spaces are to be inserted between speed and level.
The ICAO convention for specifying latitude and longitude in flight plan related messages differs from that used by data base vendors in that the hemisphere indicators (N/S, E/W) should follow, not precede, the numeric component. Therefore specifying a position as “N60W010” represents an error.
The use of FIR designators as fix names is invalid, these designators should only be used in the EET sub-field of Item 18. Some flight plans contain such designators in Item 15 to indicate the transition between two FIRs at an unnamed fix. This is a syntax error. The latitude and longitude should be used.
3.11 Field 18: Other Information
Insert the following information, in the preferred sequence shown below, which should always be included for North Atlantic flights. Additional information, as contained in ICAO Doc. 4444, appendix 3, may be included as appropriate.
Note:
The preface to the description of this Item in ICAO Doc. 4444 specifically states that only those sub-fields for which there is data to report should be included in Item 18. A sub-field header with no content constitutes a syntax error and will fail automatic processing.
EET/
Followed by waypoints or FIR Boundary designators plus accumulated estimated elapsed times from take-off to such points.
For flights conducted in the NAT Region on random routes, accumulated estimated elapsed times will be required for:
a) The last domestic reporting point prior to ocean entry.
b) The oceanic entry point.
c) Each significant point described in Item 15. (see note 2)
d) The oceanic exit point.
e) The first reporting point on the domestic track.
For flights operating along the entire length of a NAT organised track, estimated elapsed times will be required for the commencement point of the track and for FIR boundaries.
For flights operating along the entire length of one of the PTS tracks, accumulated estimated elapsed times will be required for the commencement point and for each significant point of the track thereafter.
NORTH ATLANTIC MNPSA OPERATIONS MANUAL ATTACHMENT 4
NAT MNPS 114 Edition 2009
For flights operating along the fixed ATS route network between NAM/CAR, no EETs are required.
Examples: EET/CAP0745 XYZ0830
EET/EISN0204
Notes:
Elapsed times to the oceanic entry point (e.g. EGGX0105) are required by Shanwick, New York and Santa Maria OACCs only.
REG/
The registration markings of the aircraft, if different from the aircraft identification in Field 7. (Aircraft registration should be assigned to this field for MNPS flights)
Notes:
If the aircraft registration is missing, or if it is different from that contained in the AFN CONTACT message, the ground system will not establish a CPDLC connection with that aircraft.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
NORTH ATLANTIC MNPS AIRSPACE OPERATIONS MANUAL(75)
