• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2010-05-01 10:17来源:蓝天飞行翻译 作者:admin
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

is up to 40 lines.
LAST/CURRENT LEG ECAM REPORT
A CURRENT LEG ECAM REPORT is elaborated during the
flight. After the flight, its title becomes LAST LEG
ECAM REPORT.
The purpose of this item is to present the warning
messages displayed on the upper ECAM display unit
during the last/current flight. These are primary or
independent warnings.
Each message contains the ECAM warning, the ATA
reference and the flight phase and time at which the
warning was triggered.
When several identical and consecutive warnings are
transmitted, the CFDIU memorizes the first occurence
only and carries on counting with a maximum of 8.
The occurence counter is displayed between brackets
at the end of the message.
The CFDIU capacity for warning messages memorization
is up to 40 lines.
POST FLIGHT REPORT
The POST FLIGHT REPORT (PFR) is the sum of the LAST
LEG REPORT and of the LAST LEG ECAM REPORT.
The POST FLIGHT REPORT can only be printed on ground.
The list of ECAM WARNING MESSAGES and FAULT MESSAGES
with the associated time, flight phase and ATA
reference allow the maintenance crew to make a
correlation for easier trouble-shooting.
Beginning of PFR recording:
- If flight number inserted prior to first engine
start, first engine start + 3 minutes.
- If not, aircraft speed > 80 knots.
End of PFR recording: Aircraft speed < 80 knots + 30
seconds.
TMUCFDN01-T02 LEVEL 3
EFFECTIVITY 31-32-00 Page 4
Oct 31/99
_A319/A320/A321 TECHNICAL TRAINING MANUAL
MECHANICS / ELECTRICS & AVIONICS COURSE 31 INDICATING/RECORDING SYSTEMS
UF94200
EFFECTIVITY Page 254
ALL
CFDS: FAULT PROCESSING - LAST/CURRENT LEG REPORT / LAST/CURRENT LEG ECAM REPORT /
POST FLIGHT REPORT
TMUCFDN01-P02 LEVEL 3
EFFECTIVITY 31-32-00 Page 5
Oct 31/99
_A319/A320/A321 TECHNICAL TRAINING MANUAL
MECHANICS / ELECTRICS & AVIONICS COURSE 31 INDICATING/RECORDING SYSTEMS
UF94200
EFFECTIVITY Page 255
ALL
CFDS: FAULT PROCESSING
INTERNAL/EXTERNAL FAILURES
Each BITE can make the difference between an internal
and an external failure.
Let us suppose that an angle of attack sensor failure
has been detected and that systems A, B and C are
affected by this failure.
The Air Data System will transmit an internal failure
while systems A, B and C will transmit an external
failure.
FAILURE GRAVITY
The failures are classified according to their
importance:
- Class 1 failures are the most serious ones and
require an immediate maintenance action subject
to the Minimum Equipment List (MEL).
- Class 2 failures may have consequences if a
second failure occurs.
A maintenance action is necessary at the next
adequate opportunity.
- Class 3 failures can be left uncorrected
until the next scheduled maintenance check.
TMUCFDN01-T03 LEVEL 3
EFFECTIVITY 31-32-00 Page 6
Oct 31/99
_A319/A320/A321 TECHNICAL TRAINING MANUAL
MECHANICS / ELECTRICS & AVIONICS COURSE 31 INDICATING/RECORDING SYSTEMS
UF94200
EFFECTIVITY Page 256
ALL
CFDS: FAULT PROCESSING - INTERNAL/EXTERNAL FAILURES / FAILURE GRAVITY
TMUCFDN01-P03 LEVEL 3
EFFECTIVITY 31-32-00 Page 7
Oct 31/99
_A319/A320/A321 TECHNICAL TRAINING MANUAL
MECHANICS / ELECTRICS & AVIONICS COURSE 31 INDICATING/RECORDING SYSTEMS
UF94200
EFFECTIVITY Page 257
ALL
SELF EXAMINATION
The POST FLIGHT REPORT is made up from:
A - only the LAST LEG ECAM REPORT.
B - the LAST LEG ECAM REPORT and the LAST
LEG REPORT.
C - only the LAST LEG REPORT.
TMUCFDN01 LEVEL 3
EFFECTIVITY 31-32-00 Page 8
Oct 31/99
_A319/A320/A321 TECHNICAL TRAINING MANUAL
MECHANICS / ELECTRICS & AVIONICS COURSE 31 INDICATING/RECORDING SYSTEMS
UF94200
EFFECTIVITY Page 258
ALL
31 - INDICATING/RECORDING SYSTEMS
31-31-00 CFDS: MCDU DESCRIPTION
CONTENTS:
MCDU Description
TMUCFDF03 LEVEL 2
EFFECTIVITY 31-31-00 Page 1
Jun 30/00
_A319/A320/A321 TECHNICAL TRAINING MANUAL
MECHANICS / ELECTRICS & AVIONICS COURSE 31 INDICATING/RECORDING SYSTEMS
UF94200
EFFECTIVITY Page 259
ALL
CFDS: MCDU DESCRIPTION
MCDU DESCRIPTION
1.) The brightness knob enables the brightness of the
display to be adjusted.
When turned on for the first time, the aircraft current
status page is displayed.
2.) By pressing the MCDU menu key, the MCDU menu page
is displayed, and any one of the
systems connected to the MCDU can be selected.
The green colour indicates the system already in
dialogue with the MCDU.
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:ATA 31 INDICATING AND RECORDING SYSTEM(31)