Garmin GNS 530/430 Sample Training Syllabus and Flight Lessons for Use by Flight Schools & Flying Clubs(9)

曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

a Describe common errors
In-flight
a Coach student performance
Post-flight
a Critique
 
Student’s actions
 a Ask questions regarding objective, elements and common errors
a Perform operations as directed
a Post-flight – ask pertinent questions
 
Completion standards
 Student should exhibit a high degree of knowledge of the proper methods for data entry, communication/navigation frequency selection, flight plan entry, in-flight routing changes, approach selection and activation, indicator annunciation and flight data display configuration for the various phases of IFR flight.  The in-structor should not have to provide any operational suggestions and the student should be able to quickly and confidently make the correct changes to the GNS 530/430 as required.
 
Possible errors to watch for
 a Not using the “enter” button to select stand-by frequencies
a Failure to use both COM radios
a Loading but not activating an approach
a Improper CDI output selection in GNS 430 (GPS when should be VLOC)
a Use of Direct-To navigation when Flight Plan is more appropriate for long route clearances
 

Lesson 3: GNS 530/430 Dual Installation Introduction
Student:
 Date:
 

Objective
 To develop the student’s ability to properly manage an integrated dual-installa-tion of GNS 530/430 avionics stack in an IFR environment.
 
Elements
 a GMA 340 audio panel operations
a GNS 530/430 configuration and operation
a GTX 330 operation and TIS data interpretation
a GDL 49 operation and WX data interpretation and its relation to flight planning
 
Schedule
 a Pre-flight briefing and review of student’s preparations – 30 min
a Student practice – 2 hrs
a Post-flight critique – 30 min
a Assignment for further student review – 5 min
 
Equipment
 a Airplane
a POH/AFM (appropriate Pilot’s Guide)
a Charts appropriate to flight
a Note-taking materials
 
Instructor’s actions
 Preflight
a Explain objective
a Assign route of flight
a Assign approach types to be completed
a Assign required operations using TIS and WX data
a Describe typical operation flow
a Describe common errors
In-flight
a Coach student performance
Post-flight
a Critique
 
Student’s actions
 a Ask questions regarding objective, elements and common errors
a Perform operations as directed
a Post-flight – ask pertinent questions
 
Completion standards
 Student should be able to complete basic tasks using all available avionics tools to complete the flight and demonstrate function to instructor as requested.
　
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：Garmin GNS 530/430 Sample Training Syllabus and Flight Lessons for Use by Flight Schools & Flying Clubs(9)