Config-2 Aug 01/02
+----------------------------------------------------------------------+ |Code|Item | |Progr.|Standard | | No.|No. | Description of Function Item |MCDU |Value or | | | | |GSE |Table TXY| |----|------|-----------------------------------------|------|---------|
| | | Logic based on Flight Legs: | | |
| | | | | |
| | | Every .Y02.2. flight legs the DMU search| | |
| | | in flight phase 6 for report generation | | |
| | | with stable frame criteria where the | | |
| | | best aircraft quality number QA is cal- | | |
| | | culated. The report with the best quali-| | |
| | | ty number QA is stored in the report | | |
| | | buffer. | | |
| | | | | |
| |5 | The default programming is .Flight Legs.| C | Legs |
| | | | | |
| |5.1 | Logic algorithm | | |
| | | | | |
| |5.2 | .Y02.1. flight hours | C | T24/T25 |
| | | | | |
| |5.3 | .Y02.2. flight legs | C | T24/T25 |
| | | | | |
| |5.4 | .PO2. stable periods | C | T24/T25 |
| | | (5 subperiods = 100 sec) | | |
| |5.5 | 78% < ACC < 100% | | |
| | | param. 7C.1.330.01 Eng.1 | | |
| | | param. 7C.2.330.10 Eng.2 | | |
| | | | | |
| | | Stable frame conditions: | | |
| | | During .P02. seconds the following | | |
| | | parameters are stable as defined below: | | |
| | | | | |
| | | The stable frame variation is customer | | |
| | | programmable, but only in the range | | |
| | | defined in the column for standard | | |
| | | values. | | |
| | | | | |
| |5.6 | IALT 04.1.361.--ft | AI | T24/T25 |
| | | 04.2.361.--| | |
| | | | | |
| |5.6.1 | WA of IALT | C | T24/T25 |
| | | | | |
| |5.7 | GS 04.1.312.01 kts | AI | T24/T25 |
| | | 04.2.312.10 | | |
| | | | | |
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：getting to grips with aircraft performance monitoring(89)
