曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
[1L] DIR TO To prepare a request to go from the present position to a
selected waypoint.
[2L] SID or STAR To enter a request for a departure or arrival procedure,
depending on the current flight phase. The departure procedure
can only be proposed before takeoff. The arrival procedure can
only be proposed after takeoff.
[3L] HEADING To prepare a heading change request.
[5L] ALL FIELDS ERASE To erase all the data that was entered on the page, and erase
the data that was entered on the other associated pages.
[6L] ATC MENU RETURN To call up the ATC MENU page.
[1R] WX DEV UP TO To prepare a request for an offset from the initial route, due to
weather conditions.
[2R] OFFSET/START AT To enter an offset from the initial route. The “START AT” field is
optional, and can either be filled in with a position or a time.
[3R ] GROUND TRK To prepare a track change request.
[4R] WHEN CAN WE EXPECT
BACK ON ROUTE
To prepare a negotiation request to return to the initial route.
The same request can be performed on the "WHEN CAN WE
EXPECT" page ([4R] key).
[5R] ADD TEXT To call up the TEXT page. It is active while a message is being
created.
A330/A340 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
INFORMATION SYSTEM
CNS/ATM CONTROLS/INDICATORS - MCDU
A330/A340 FLEET DSC-46-55-30 P 5/56
FCOM 19 AUG 10
[6R] ATC REQ DISPL To display the prepared message on the DCDU screen.
Applicable to:
ATC VERT REQ PAGE 1
To prepare messages that request a vertical flight plan modification, which are sent to the ATC.
[1L] CLB TO/START AT To prepare a request to climb to a new altitude. The “START AT”
field is optional, and can either be filled in, with a position or a
time.
If the request is deferred, the “START AT” field should be filled in
with the starting-climb waypoint.
[2L] DES TO/START AT To prepare a request to descend to a new altitude. If the request
is deferred, the “START AT” field should be filled in with the
starting-descent waypoint.
[3L] WHEN CAN WE EXPECT
HIGHER ALT
To prepare a negotiation request to climb to a higher altitude.
If a lower altitude has already been selected, setting a higher
altitude deselects the lower altitude.
The same request can be performed on the WHEN CAN WE
EXPECT page ([4R] key).
[5L] INPUTS ERASE To erase all the data that was entered on the page, and erase
the data that was entered on the other associated pages.
[6L] ATC MENU RETURN To call up the ATC MENU page.
[1R] ALT To prepare a request for a new altitude.
[2R] SPD To prepare a request for a new speed.
A330/A340 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
INFORMATION SYSTEM
CNS/ATM CONTROLS/INDICATORS - MCDU
A330/A340 FLEET DSC-46-55-30 P 6/56
FCOM 19 AUG 10
[3R] WHEN CAN WE EXPECT
LOWER ALT
To prepare a negotiation request to descend to a lower altitude.
If a higher altitude has already been selected, setting a lower
altitude deselects the higher altitude. The same request can be
performed on the WHEN CAN WE EXPECT page ([4R] key).
[4R] WHEN CAN SPD To prepare a negotiation request for a new speed-deferred
clearance.
The same request can be performed on the WHEN CAN WE
EXPECT page ([4R] key).
[5R] ADD TEXT To call up the TEXT page. It is active while a message is being
created.
[6R] ATC REQ DISPL To display the prepared message on the DCDU screen.
Applicable to: ,
ATC VERT REQ PAGE 1
To prepare messages that request a vertical flight plan modification, which are sent to the ATC.
[1L] CLB TO/START AT To prepare a request to climb to a new altitude. The “START AT”
field is optional, and can either be filled in, with a position or a
time.
If the request is deferred, the “START AT” field should be filled in
with the starting-climb waypoint.
[2L] DES TO/START AT To prepare a request to descend to a new altitude. If the request
is deferred, the “START AT” field should be filled in with the
starting-descent waypoint.
A330/A340 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
INFORMATION SYSTEM
CNS/ATM CONTROLS/INDICATORS - MCDU
A330/A340 FLEET DSC-46-55-30 P 7/56
FCOM 19 AUG 10
[3L] WHEN CAN WE EXPECT
HIGHER ALT
To prepare a negotiation request to climb to a higher altitude.
If a lower altitude has already been selected, setting a higher
altitude deselects the lower altitude.
The same request can be performed on the WHEN CAN WE
EXPECT page ([4R] key).
[5L] ALL FIELDS ERASE To erase all the data that was entered on the page, and erase
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
A330/A340机组操作手册 FLIGHT CREW OPERATING MANUAL FCOM 4(30)
