曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
displays the PRINT FUNCTION page from which the ACARS FUNCTION page can be accessed.
A330/A340 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
CONTROLS AND INDICATORS - MCDU - PAGE DESCRIPTION
A330/A340 FLEET DSC-22_20-50-10-20 P 77/116
FCOM 19 AUG 10
ACARS FUNCTION PAGE 1
Applicable to:
TITLE ACARS FUNCTION 1/2 in white
Line 1 F-PLN INIT
REQ*
Pressing this key sends a request for flight plan to the ground (downlink
message).
INIT REQUEST prompt of the INIT A page provides the same function.
Line 2 TO DATA REQ* Pressing this key sends a request for takeoff data.
Displayed in DONE and PREFLIGHT phases.
TO DATA REQUEST prompt of the UPLINK TO DATA REQ page provides
the same function.
Line 3 WIND DATA
REQ*
Pressing this key sends a request for wind data.
WIND REQUEST prompt of the CLIMB, CRUISE and DESCENT WIND
pages provides the same function.
Note: If “REQ” is not followed by a star, the request cannot be sent (downlink message).
When a function (line 1 or 2 or 3) is deactivated using the navigation database policy file,
the corresponding line is blank.
[ 6L ] RETURN The pilot presses this key to make the display revert to the DATA INDEX
page.
[ 6R ] PRINT
FUNCTION
The pilot presses this key to access the PRINT FUNCTION page. (Refer to
DSC-22_20-50-10-25-L PRINT FUNCTION PAGES - GENERAL).
A330/A340 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
CONTROLS AND INDICATORS - MCDU - PAGE DESCRIPTION
A330/A340 FLEET DSC-22_20-50-10-20 P 78/116
FCOM 19 AUG 10
UPLINK TO DATA REQ PAGES
Applicable to:
This page allows the pilot to send a request for takeoff data for up to 2 runways. There is one page
for each runway. The page is accessed from the PERF TAKEOFF page, or from the UPLINK XXX
(MAX or FLX or DRT) TO DATA page, by pressing the UPLINK TO DATA prompt.
TITLE The title appears in white.
[ 1L ] TOW/TOCG
(green)
This field is dashed, until a runway is defined in the [ 1R ] field.
The TOW/TOCG are the values of the INIT B and FUEL PRED pages. If not
available, dashes are displayed. They cannot be modified by the pilot.
[ 2L ] TEMP/QNH or
QFE (green/blue) This field is dashed until a runway is defined in the [ 1R ] field :
TEMP = Defaulted to SAT ; cannot be modified by the crew.
QNH or QFE = Defaulted to FCU selection, and can be modified by
the pilot.
[ 3L ] MAG WIND (blue) This field is dashed, until a runway is defined in the [ 1R ] field, and displays
the wind at the origin. It can be modified by the pilot.
[ 4L ] CONTAM (blue This field is dashed, until a runway is defined in the [ 1R ] field. The display
is defaulted to DRY
This field is dashed, until a runway is defined in the [ 1R ] field. The display
is defaulted to DRY
DRY, WET, 1/4 WATER, 1/2 WATER, 1/4 SLUSH, 1/2 SLUSH, COMP
SNOW.
[ 6L ] RECEIVED TO
DATA
This prompt calls up the UPLINK MAX (or FLX or DRT) TO DATA page that
displays the data received by ACARS.
A330/A340 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
CONTROLS AND INDICATORS - MCDU - PAGE DESCRIPTION
A330/A340 FLEET DSC-22_20-50-10-20 P 79/116
FCOM 19 AUG 10
[ 1R ] SHIFT/RWY
(blue)
This field is dashed until a runway is defined in the F-PLN.
If a runway is defined in the F-PLN, it is automatically filled:
SHIFT : value from PERF TO page or blue bracket if no value
defined.
RWY : F-PLN departure runway.
This field is modifiable by the pilot.
[ 2 R ] TO LIMIT (blue) It is dashed until a runway is defined in [ 1R ] field.
It displays blue brackets [ ] when a runway is defined.
The pilot may enter a length considering obstacles on the runway.
[ 3R ] FLAPS/THS
(blue)
This field is dashed until a runway is defined in [ 1R ] field; then defaulted to
values from PERF TO page. Blue brackets are displayed if PERF TO page
has no defined values.
[ 4R ] FLEX TO TEMP
(blue)
This field is dashed until a runway is defined in [ 1R ] field; then it is
defaulted to values from the PERF TO page. Blue brackets are displayed if
PERF TO page has no defined values.
This field is modifiable by the pilot. The pilot may enter a FLEX TO
temperature (FXX)
[ 6R ] TO DATA
REQUEST* (amber)
Pressing the key sends the takeoff data request message to the ground.
The star disappears when the request is sent. The star is displayed again
when data are available.
Page 2/2 is a page used for requesting a second runway data.
Note: If the UPLINK TO DATA REQ page 2 is accessed (page 1 being filled), the fields of page
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
A330/A340机组操作手册 FLIGHT CREW OPERATING MANUAL FCOM 1(120)
