曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
[ 2L ] CLB/DES SPD
LIM (magenta)
This field displays the speed limit applicable to the climb or descent phase.
It displays it in a large font when data has been inserted manually and in a
small font when data comes from the data base.
[ 3L ] SPD CSTR
(magenta)
This field displays any speed constraint assigned to the revise waypoint. It
is in a large font when inserted manually, and in a small font when it comes
from the data base.
It is not displayed at the origin airport, a FROM waypoint, a speed limit
pseudo waypoint, or the destination airport.
[ 4L ] QNH This field functions only when the revise waypoint is the primary destination.
It allows the pilot to enter the sea-level atmospheric pressure.
This field is identical to the QHN field of the PERF APPR page.
[ 5L ] WIND (blue) The pilot presses this key to access to the wind pages.
The first wind page that is displayed, corresponds to the selected waypoint
e.g. climb page if the selected waypoint is a climb phase waypoint.
A CLR action reverts it to brackets.
[ 6L ] RETURN or CLB The pilot presses this key to return to the last displayed flight plan page.
When displayed pressing this key assigns the constraint to CLB phase and
inserts it into the vertical flight plan. The page reverts to the flight plan page.
[ 2R] UTC CSTR This field displays this legend at all waypoints except the FROM waypoint.
At origin it enables the pilot to enter an estimated takeoff time.‐
At any waypoint it enables to enter one time constraint. (Only one for the‐
entire flight plan).
It will be entered as HH MM (HH hours, MM minutes). Maximum entry is
clock time +20 h.
[ 3R ] ALT CSTR
(magenta)
This field displays the altitude constraint assigned to this revise waypoint.
It uses a large font when the constraint is entered manually, a small font
when it is from the database.
A CLR action reverts it to brackets.
The constraint may be :
• “At”, entered as XXXXX (FL 180, for example)
• “At or above”, entered as + XXXXX or XXXXX + (FL + 310, for example)
• “At or below”, entered as - XXXXX or XXXXX - (-5 000, for example)
• A “window” constraint.
The altitude window consists of two altitudes between which the aircraft
should fly. The crew cannot manually enter a “window” constraint.
A330/A340 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
CONTROLS AND INDICATORS - MCDU - PAGE DESCRIPTION
A330/A340 FLEET DSC-22_20-50-10-20 P 42/116
FCOM 19 AUG 10
G/S INTCP (green) This field displays the glide intercept altitude for an ILS approach, on the
vertical revision page at destination.
[ 4R ] ALT ERROR
(green)
When the aircraft misses a predicted altitude constraint, this field displays
the difference between the altitude constraint and the predicted altitude.
If, for example, “- 500” appears in this field in green, the aircraft will reach
the waypoint at an altitude 500 ft below the constraint altitude.
This applies only to waypoints in the climb and descent phases.
[ 5R ] STEP ALTS This legend appears for any waypoint once a cruise altitude has been
entered. It is not available in engine out, descent, approach and go around
phases.
This gives the pilot access to the step altitudes page.
[ 6R ] DES When this field displays “DES”, pressing this key assigns the constraints to
the descent phase and inserts them into the vertical flight plan. The page
reverts to the F-PLN page. (See Note, below)..
Note: Altitude and speed constraints may apply to climb, descent or approach phase, but never to
cruise phase. Fields 6L/6R display “CLB/DES” when the revise waypoint is a cruise phase
waypoint and the FMGS needs to know if the new constraint is to be applied in climb or
descent phase. The FMGS will modify the cruise phase accordingly. These 2 prompts also
display “CLB/DES” when the predictions are not computed. (top of climb and top of descent
not yet defined).
STEP ALTS PAGE
Applicable to:
This page enables the flight crew to insert up to four geographic step points and one optimal step
point into the flight plan. This page also displays the cost savings associated with the optional step.
The flight crew either calls it up from the vertical revision page, or from the performance cruise page.
A330/A340 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
CONTROLS AND INDICATORS - MCDU - PAGE DESCRIPTION
A330/A340 FLEET DSC-22_20-50-10-20 P 43/116
FCOM 19 AUG 10
TITLE STEP ALTS, followed by the current cruise altitude.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
A330/A340机组操作手册 FLIGHT CREW OPERATING MANUAL FCOM 1(110)
