曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
the GES management and the circuit-mode services in the
GES:
1) frequency;
2) channel rate setting (if selectable);
a) to circuit-mode services:
1) log status information:
i) logged-onilogged-off;
ii) AES ID;
iii) GES ID;
2) EIRP value;
3) frequency assigned (Q number, application reference
number);
3) power setting;
4) mode (T, or R, or C, if selectable);
5) channel unit number:
b) from physical layer (for each channel):
1) estimated C channel bit error rate;
2) channel unit number;
3) mode.
2111100
No. 75
Part I Annex 10 - Aeronautical Telecommunications
4.10.4 GES management functions 4.10.4.2.2.4 The regional data for a satellite service area
shall include the following information:
4.10.4.1 The GES management shall carry out the
following functions: a) system table revision number;
a) GES table management; b) satellite ID;
b) GES log status management;
c) GES channel management;
d) GES system broadcast.
4.10.4.2 GES TABLE MANAGEMENT
c) for a satellite with a global beam, for each GES
supporting the global beam:
2) P,,, channel and R, channel frequencies; and
3) P, channel and R, channel rates;
4.10.4.2.1 The GES management shall maintain the
following tables: d) for a satellite with spot beams only:
a) AES system table;
b) AES log-on status table.
1) beam ID (same as in e) of initial search);
2) GES spot beam support table indicating in which
spot beam the GES radiates; and
4.10.4.2.2 AES SYSTEM TABU 3) for each GES supporting a spot beam:
4.10.4.2.2.1 The AES system table for a satellite service
area shall include initial search data (search frequencies for
satellite and beam identification) and regional data
(information about each GES in the satellite service area).
4.10.4.2.2.2 Each GES in a satellite service area shall
broadcast both the initial search data and regional data. The
initial search data shall consist of the information specified in
4.10.4.2.2.3 for each satellite service area of all the satellite
systems providing AMS(R)S services in accordance with
SAWS for near geosynchronous satellites. The regional data
shall consist of the information specified in 4.10.4.2.2.4 for
that satellite service area. The initial search data shall be
exchanged in a timely manner among all AMS(R)S providers
and shall be broadcast as common initial search data.
4.10.4.2.2.3 The initial search data for a satellite service
area shall include the following satelliteheam identifying
information for each beam that supports a satellite/beamidentifying
P, channel in the satellite service area:
i) GES ID;
ii) P,,, channel and R, channel frequencies; and
iii) P, channel and R, channel rates.
4.10.4.2.3 AES LOG-ON STATUS TABLE
4.10.4.2.3.1 Each GES shall maintain an AES log-on
status table, which shall include the information specified in
4.10.4.2.3.2 and 4.10.4.2.3.3.
4.10.4.2.3.2 The GES shall include in its AES log-on
status table, for every AES logged-on to it or to any other GES
in the same satellite service area, the following information:
a) AES ID;
b) satellite D;
a) primary satelliteheam-identifying P, channel c) beam ID;
frequency at 600 bitsts;
d) log-on GES ID.
b) secondary satelliteheam-identifying P,,, channel
frequency at 600 bitsls; 4.10.4.2.3.3 For each AES logged-on to the GES, the
AES log-on status table at the GES shall contain the following
c) satellite ID; information in addition to the information specified in
4.10.4.2.3.2:
d) satellite location, orbit inclination and right asce~lsion
epoch; a) P channel frequency assigned to the AES;
e) bean1 ID (for spot-beam-only satellites). b) R channel frequencies assigned to the AES;
211 ,uoo
No. 75
Annex 10 - Aeronautical Telecommunications Volume ZZZ
c) T channel frequencies assigned to the AES;
d) channel rate capabilities of P, R, T and C channels;
e) AES activity indicator (active or inactive).
4.10.4.2.3.4 AES log-on status table update
The GES shall update the AES log-on status table when an
AES logs on (initial or renewal) or logs off from this GES or
when the GES receives log-on or log-off information
corresponding to an AES from another GES.
4.10.4.3 GES LOG STATUS
MANAGEMENT
4.10.4.3.1 The GES log status management function shall
manage the AES log-on.log-off, verify the activity of each of
its log-on AESs, renew the log-on (when required), and
reassign data channels to the AESs (when required).
4.10.4.3.2 LOG-ON
Note.- The AES initiates a log-oti by sending a log-on
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
附件10--航空电信an10_v3_1ed_amend_75(66)
