曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
To set desired airspeed:
IAS/MACH selector ............................................................ Rotate
Set desired speed in IAS/MACH window.
If FLCH desired:
FLCH switch ..........................................................................Push
Pitch mode changes unless G/S and LOC captured. Verify THR,
IDLE, or HOLD displays on flight mode annunciation.
If VNAV desired:
VNAV switch ........................................................................Push
Pitch mode changes when in V/S or ALT. Verify THR REF, THR,
SPD, IDLE, or HOLD displays on flight mode annunciation.
If TO/GA is desired:
TO/GA switch ........................................................................Push
Pitch and roll modes change to TO/GA. Verify THR or THR REF
displays on flight mode annunciation.
If pitch mode is VNAV PTH, VNAV ALT, VNAV SPD, or FLCH SPD:
AUTOTHROTTLE ARM switch ..............................OFF, then ARM
Verify THR REF, THR, SPD, IDLE, or HOLD displays on flight mode
annunciation.
December 01, 1999
747 Operations Manual
Copyright © The Boeing Company. See title page for details.
SP.4.4 D6-30151-425
Supplementary Procedures -
Automatic Flight
Localizer Approach
Pitch mode may be VNAV or V/S . If using VNAV, verify proper approach and
altitudes have been entered in the CDU and use speed intervention for airspeed
control.
LOCALIZER switch ........................................................................ Push
When on an intercept heading to the localizer course with PFD localizer
pointer displayed, push LOC switch.
Verify the armed roll flight mode annunciation is LOC.
Verify the engaged roll flight mode annunciation is LOC upon
localizer capture.
Prior to descent to minimum descent altitude(MDA):
ALTITUDE window – Set
Set intermediate altitude constraint orMDA if no intermediate altitude
constraint exists.
In descent, set each intermediate altitude constraint and MDA.
If constraints or MDA do not end in 00 (for example, 1820), set ALT
window to closest 100 foot increment below.
If using VNAV:
Prior to minimum descent altitude:
Missed approach altitude – Set
Set in ALT window.
At minimum descent altitude and landing:
Autopilot disengage switch – Push
Disengage autopilot before descending below MDA.
Autothrottle disconnect switch - Push
Disconnect autothrottle before descending below MDA.
At minimum descent altitude and circling to land:
ALTITUDE HOLD switch – Push
If landing:
Autopilot disengage switch - Push
Disengage autopilot before descending below MDA.
December 01, 1999
747 Operations Manual
Supplementary Procedures -
Automatic Flight
Copyright © The Boeing Company. See title page for details.
D6-30151-425 SP.4.5
Autothrottle disconnect switch - Push
Disconnect autothrottle before descending below MDA.
If using V/S:
At descent point:
VERTICAL SPEED switch – Push
Verify V/S displays in flight mode annunciation.
Desired vertical speed – Set
Set desired vertical speed to descend to MDA.
At minimum descent altitude, straight-in or circle-to-land:
ALTITUDE HOLD switch - Push
Missed approach altitude – Set
Set in ALT window.
If landing:
Autopilot disengage switch – Push
Disengage autopilot before descending below MDA.
Autothrottle disconnect switch - Push
Disconnect autothrottle before descending below MDA.
December 01, 1999
747 Operations Manual
Copyright © The Boeing Company. See title page for details.
SP.4.6 D6-30151-425
Supplementary Procedures -
Automatic Flight
Localizer Back Course Approach
Pitch mode may be VNAV or V/S.When using VNAV, verify proper approach and
altitudes have been entered in the CDU and use speed intervention for airspeed
control.
Roll mode may be LNAV or HDG SEL. If LNAV does not track correct course,
use HDG SEL.
Observe PFD localizer pointer.
Prior to descent to minimum descent altitude:
ALTITUDE window – Set
Set intermediate altitude constraint orMDA if no intermediate altitude
constraint exists.
In descent, set each intermediate altitude constraint and MDA.
If constraints or MDA do not end in 00 (for example, 1820), set ALT
window to closest 100 foot increment below.
If using VNAV:
Prior to minimum descent altitude:
Missed approach altitude – Set
Set in ALT window.
At minimum descent altitude and landing:
Autopilot disengage switch – Push
Disengage autopilot before descending below MDA.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
波音747-441操作手册1(50)
