1.0
Port 2.1.1.1.0.6 IFP.TJS_Port
1.0
Port 2.1.1.1.0.6 IFP.RemoteDisplay_Port
1.0
Port 2.1.1.1.0.5 IFP.FLS_Port
1.0
Port 2.1.1.1.0.7 [A1] IFP.CPDC_Port
1.0
Port 2.1.1.1.0.1 IFP.ARTCC_Port
1.0
CompositeStructure diagram: 2.1.1.1 [A1] Interface Proxies (IFP)
2.1.4 [S3] Conflict Probe Tools (CPT)
Type: Object
Status: Proposed. Version 1.0. Phase 1.0.
Package: 2.0 Ground Data Processing (GDP) Keywords:
Detail: Created on 5/10/2006. Last modified on.11/28/2006.
GUID: {E2D5C832-D75B-4852-92DC-152DBD176472}
This function provides flight plan related decision support services. The CPT function uses flight data objects generated by the FDP function and provides services that include strategic conflict probe and trial planning. The controller can enter amendments for trial planning and probing by the system. The trial plan can be submitted as an amendment to the active flight plan. [from ERAM SADD]
[S3]: The CPT is augmented to reduce the tolerances/separation down to wake turbulance distances.
Note: To be consistent with current automation functions, the CPT function will remain as an 'very internal' function with interfaces only to the GUI, FDP, and system operations, i.e., there are no direct connections to data communication functions (e.g., CPDC or MCI).
Connections
Connector Source Target Notes
Realisation
Source -> Destination
ConnSource.Scope= Public
ConnSource.Role
ConnSource.RoleNote
Element.Name=
2.1.4 [S3] Conflict Probe Tools (CPT)
Element.Type=
Object
ConnTarget.Scope= Public
ConnTarget.Role=
ConnTarget.RoleNote=
Element.Name=
ASUM-0002A: CPT does not directly interact with DCS.
Element.Type=
Requirement
Realisation
Source -> Destination
ConnSource.Scope= Public
ConnSource.Role
ConnSource.RoleNote
Element.Name=
2.1.4 [S3] Conflict Probe Tools (CPT)
Element.Type=
Object
ConnTarget.Scope= Public
ConnTarget.Role=
ConnTarget.RoleNote=
Element.Name=
TODO-00037: [DONE] CP/FDP ATW Functionality
Element.Type=
Requirement
Embedded Elements
Element Detail Notes
Port 2.1.4.0.1 [S3] CPT.GUI_Port
1.0
Port 2.1.4.0.2 [S3] CPT.FDP_Port
1.0
2.1.3 [S2] Surveillance Data Processing (SDP)
Type: Object
Status: Proposed. Version 1.0. Phase 1.0.
Package: 2.0 Ground Data Processing (GDP) Keywords:
Detail: Created on 5/10/2006. Last modified on.11/28/2006.
GUID: {14FADBEB-0404-4292-A467-347CB86DA5B1}
This function performs real time quality control assessment of radar surveillance interfaces, uses the target reports in a multi-sensor fusion tracker, provides the target and track information for display, and uses the multi–sensor fusion tracks to generate aircraft-to-aircraft, aircraft-to-terrain and aircraft-to-airspace alerts. This function also processes long range radar weather messages. [from ERAM SADD, Section 4.2]
[S2]: SDP is enhanced to control the type and periodicity of AC provided MCI data updates (_[S2]_AC_MCI_Mgmt). 中国航空网 www.aero.cn 航空翻译 www.aviation.cn 本文链接地址：Functional Architecture for the Data Communication System(45)
