EFFECTIVITY BEJ ALL 34-46-00
Page 58
D633W101-BEJ Sep 05/2002
777 AIRCRAFT MAINTENANCE MANUAL
GPWS -NORMAL DISPLAYS
EFFECTIVITY BEJ ALL 34-46-00
Page 59
D633W101-BEJ Jan 05/2002
GPWS -MODE DESCRIPTION SUMMARY
General
This summary shows this information:
*
GPWS modes
*
Mode conditions
*
Aural messages for each mode
*
Lights or displays that come on.
EFFECTIVITY BEJ ALL 34-46-00
Page 60
D633W101-BEJ Sep 05/2002
777 AIRCRAFT MAINTENANCE MANUAL
GPWS -MODE DESCRIPTION SUMMARY
EFFECTIVITY BEJ ALL 34-46-00
Page 61
D633W101-BEJ Jan 05/2002
GPWS -SPEECH PROM
General
The speech PROM supplies aural messages when the mode detector detects an alert or warning condition.
The speech PROM also gives altitude callouts for selected radio altitudes.
Description
The speech PROM gives only one message at a time. If more than one message discrete comes from the mode detector, the speech PROM sends the message that has the highest priority.
The glideslope repetition rate circuit controls the repetition rate of the glideslope message.
The program pins select the radio altitude callout configuration.
Training Information Point
The GPWC stores these two aurals which are not related to the GPWC alert modes:
*
ENGINE FAIL
*
V1.
The GPWC makes these aurals come on when the GPWC receives a request from the AIMS.
The AIMS makes the ENGINE FAIL aural request when an engine fails, the airplane is on the ground, and the airplane CAS is more than 65 knots, but less than 3 knots below V1. V1 is the takeoff decision speed.
The ENGINE FAIL and V1 aurals do not come on during a GPWC test.
EFFECTIVITY BEJ ALL 34-46-00
Page 62
D633W101-BEJ Sep 05/2002
777 AIRCRAFT MAINTENANCE MANUAL
GPWS -SPEECH PROM
EFFECTIVITY BEJ ALL 34-46-00
Page 63
D633W101-BEJ Jan 05/2002
GPWS -ENVELOPE MODULATION
General
Some airports have unusual terrain clearances near their runways that cause false messages by the GPWS. Envelope modulation modifies specific alert and warning areas to prevent false messages.
Functional Description
The airports that need envelope modulation are in the GPWC memory and identified by their latitude and longitude. As the airplane approaches one of these airports, the GPWC looks at other airplane parameters to verify if an envelope modulation condition exists. The additional parameters are:
*
Radio altitude
*
Magnetic track
*
Glide slope deviation
*
Localizer deviation
*
Selected runway heading
*
Barometric corrected altitude.
EFFECTIVITY BEJ ALL 34-46-00
Page 64
D633W101-BEJ Sep 05/2002
777 AIRCRAFT MAINTENANCE MANUAL
GPWS -ENVELOPE MODULATION
EFFECTIVITY BEJ ALL 34-46-00
Page 65
D633W101-BEJ Jan 05/2002
GPWS -OVERRIDE CAPABILITIES
General
These override switches modify or cancel certain GPWS modes:
*
Ground proximity flap override switch
*
Ground proximity gear override switch
*
Terrain override switch.
The graphic shows these conditions:
*
Modes
*
Configuration of the flaps and gear
*
Effects of each override switch for the mode.
EFFECTIVITY BEJ ALL 34-46-00
Page 66
D633W101-BEJ Sep 05/2002
777 AIRCRAFT MAINTENANCE MANUAL
GPWS -OVERRIDE CAPABILITIES
EFFECTIVITY BEJ ALL 34-46-00
Page 67
D633W101-BEJ Jan 05/2002
GPWS -PFD AND MASTER WARNING LIGHT ANNUNCIATIONS
Master Warning Lights
The captain and first officer red master warning lights come on with a PULL UP or WINDSHEAR warning. The AIMS cabinets send a discrete to the warning electronic system (WES) to enable the lights.
PFD Warning Annunciations
The primary flight displays (PFDs) show these two GPWS messages:
*
Red PULL UP
*
Red WINDSHEAR.
The red PULL UP message shows for these conditions:
*
Mode 1 warnings
*
Mode 2 warnings
*
Terrain awareness warnings.
The red WINDSHEAR message shows a mode 7 warning.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：777 AMM 飞机维护手册 导航 Navigation 1(70)
