HYDRAULIC INDICATING SYSTEM -TEMPERATURE INDICATING
EFFECTIVITY BEJ ALL PRE SB 777-29-0024 29-30-00
Page 19
D633W101-BEJ Sep 05/2003
HYDRAULIC INDICATING SYSTEM -TEMPERATURE INDICATING
EFFECTIVITY BEJ ALL POST SB 777-29-0024 29-30-00
Page 20
D633W101-BEJ Sep 05/2003
777 AIRCRAFT MAINTENANCE MANUAL
THIS PAGE IS INTENTIONALLY LEFT BLANK
29-30-00
Page 21 D633W101-BEJ Sep 05/2003
HYDRAULIC INDICATING SYSTEM -FLUID QUANTITY INDICATING
General
A quantity transmitter in each of the hydraulic reservoirs measures fluid quantity. Reservoir quantity data goes to the HYDIM cards.
Functional Description
The reservoir quantity transmitters are capacitance-type transmitters. They send a signal to the HYDIM cards in proportion to reservoir fluid quantity. The HYDIM cards send reservoir quantity signals to the AIMS and to the reservoir quantity gage in the hydraulic service bay.
The reservoir quantity indication makes allowance for temperature changes to prevent nuisance refill and overfill indications.
Indication
Reservoir quantities show on these MFD formats:
*
Status display
*
Hydraulic synoptic display
*
Maintenance page.
Quantity indication shows as a decimal number. The reservoir full level shows as 1.00.
If the reservoir quantity is 1.20 or more, an OF (overfill) shows next to the quantity indication on the status display, the hydraulic synoptic display and the hydraulic maintenance page. The OF shows only when the airplane is on the ground.
If reservoir quantity is 0.75 or less, an RF (refill) shows next to the quantity indication on the status display, the hydraulic synoptic display, and the hydraulic maintenance page. The RF shows only when the airplane is on the ground.
If reservoir quantity is 0.40 or less, a LO shows next to the quantity indication on the status display, the hydraulic synoptic display, and the hydraulic maintenance page.
These advisory messages show if reservoir quantity is 0.40 or less:
*
HYD QTY LOW L
*
HYD QTY LOW C
*
HYD QTY LOW R.
The advisory messages and the LO indication reset when the quantity is more than 0.42.
Training Information Point
If the reservoir fluid level is at the top of the standpipe, the quantity indication shows 0.00.
EFFECTIVITY BEJ ALL 29-30-00
Page 22
D633W101-BEJ Sep 05/2003
HYDRAULIC INDICATING SYSTEM -FLUID QUANTITY INDICATING
EFFECTIVITY BEJ ALL 29-30-00
Page 23
D633W101-BEJ Sep 05/2003
中国航空网 www.aero.cn 航空翻译 www.aviation.cn 本文链接地址:777 AMM 飞机维护手册 液压 Hydraulic Power(30)