777 AIRCRAFT MAINTENANCE MANUAL
FUEL INDICATING -FQIS -WIRING HARNESS
EFFECTIVITY BEJ ALL 28-40-00
Page 11
D633W101-BEJ Jan 05/2002
FUEL INDICATING -FQIS -COMPONENT LOCATIONS -WINGS
FQIS Connectors
Each half of the center tank has one FQIS connector. It is on the front wing spar near the wing-to-body fairing.
Each main tank has two FQIS connectors. They are on the rear wing spar, outboard of the main landing gear shock strut, near the landing gear trunnion door.
Fuel Temperature Sensor
There is one fuel temperature sensor in the left main tank. It attaches to the rear spar of the left wing, below the main tank inboard FQIS connector.
EFFECTIVITY BEJ ALL 28-40-00
Page 12
D633W101-BEJ Sep 05/2002
FUEL INDICATING -FQIS -COMPONENT LOCATIONS -WINGS
EFFECTIVITY BEJ ALL 28-40-00
Page 13
D633W101-BEJ Jan 05/2002
FUEL INDICATING -FQIS -FUEL QUANTITY PROCESSOR UNIT
Purpose
The fuel quantity processor unit (FQPU) does these functions:
*
Calculates the fuel weight for each tank
*
Calculates the total fuel weight
*
Shows the weights on the IRP indicators
*
Sends the weights to the AIMS
*
Causes the refuel valves to close
*
Monitors the FQIS for faults
*
Sends fault data to the CMCS.
Location
The FQPU is on the E5-3 shelf.
Physical Description
The FQPU is in a 5 MCU ARINC 600 container. The container has twelve printed circuit boards. The FQPU connects to airplane wiring.
Training Information Point
The FQPU has software that is data-loadable.
EFFECTIVITY BEJ ALL 28-40-00
Page 14
D633W101-BEJ Sep 05/2002
FUEL INDICATING -FQIS -FUEL QUANTITY PROCESSOR UNIT
EFFECTIVITY BEJ ALL 28-40-00
Page 15
D633W101-BEJ Jan 05/2002
FUEL INDICATING -FQIS -POWER
General
The FQPU connects to two isolated 28v dc power sources at one time. The FQPU operates when one or both of the sources have power.
Power Sources
The FQPU gets power from four different sources:
*
Captain’s flight instrument bus
*
Right dc bus
*
Ground handling bus
*
Hot battery bus.
During normal operation, the refuel station door is closed. The FQPU gets power from the captain’s flight instrument bus and the right dc bus. The two power sources are connected together inside the FQPU. Whichever has the higher voltage supplies power to the two FQPU channels.
When the refuel station door is open and the ground handling bus has power, the fuel quantity power transfer relay energizes. This causes the FQPU to get power from different sources. The FQPU gets power from the ground handling bus and the hot battery bus.
If ground handling power is not available, you put the refuel station power switch in the battery position (BATT). This causes the hot battery bus to energize the refuel power transfer relay and the fuel quantity power transfer relay. When the two relays energize, the FQPU gets power from the hot battery bus only.
EFFECTIVITY BEJ ALL 28-40-00
Page 16
D633W101-BEJ Sep 05/2002
777 AIRCRAFT MAINTENANCE MANUAL
FUEL INDICATING -FQIS -POWER
EFFECTIVITY BEJ ALL 28-40-00
Page 17
D633W101-BEJ Jan 05/2002
FUEL INDICATING -FQIS -FUNCTIONAL DESCRIPTION
General
The FQPU has two channels, 1 and independently. Each channel includes circuit card and an ARINC 629/429 card. an 2, that input/output operate (I/O)
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:777 AMM 飞机维护手册 飞行操纵 Fuel(28)