曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
Wheels and Brakes 15−10−17
Description 15−10−17
Components and Operation 15−10−17
Controls and Indicators 15−10−20
EICAS Messages 15−10−22
SUMMARY
Power Supply and Circuit Breaker Summary 15−20−1
LIST OF ILLUSTRATIONS
DESCRIPTION
Figure 15−10−1 Landing Gear 15−10−1
Figure 15−10−2 Main Landing Gear 15−10−3
Figure 15−10−3 Nose Gear 15−10−5
Figure 15−10−4 Normal Gear Extension 15−10−7
Figure 15−10−5 Alternate Gear Extension 15−10−10
Figure 15−10−6 MLG BAY OVHT TEST Switches 15−10−14
Figure 15−10−7 Steering Tiller 15−10−16
LANDING GEAR
Table of Contents
Vol. 2 15−00−1
REV 76, Jul 17/09
CHAPTER 15 - LANDING GEAR
15−00−1
CL−604 Operating Manual
PSP 604−6
TABLE OF CONTENTS
Page
TABLE OF CONTENTS
LIST OF ILLUSTRATIONS
DESCRIPTION
Figure 15−10−8 Brakes and Lower Main Gear Structure 15−10−18
Figure 15−10−9 Hydraulic Synoptic Page (Inboard and Outboard Brake
Pressure) 15−10−18
Figure 15−10−10 Parking Brake Handle 15−10−19
Figure 15−10−11 Landing Gear Panel 15−10−20
Figure 15−10−12 Landing Gear Manual Release 15−10−21
Figure 15−10−13 Landing Gear EICAS Displays 15−10−21
LANDING GEAR
Table of Contents
Vol. 2 15−00−2
REV 66, Feb 01/07
CL−604 Operating Manual
PSP 604−6
Page
GENERAL
The landing gear for the Challenger 604 is arranged in a standard retractable tricycle configuration.
Associated systems include:
• Proximity sensing system
• Nose gear doors
• Nosewheel steering
• Wheel brakes with anti-skid
• Main landing gear overheat detection
Hydraulic system 3 powers landing gear extension and retraction, nosewheel steering, and brakes.
Landing Gear
Figure 15−10−1
LANDING GEAR
Description
The main landing gear consists of two trailing link-type assemblies. The main landing gear retracts
inward towards the centerline of the fuselage. The main landing gear is hydraulically actuated by
hydraulic system 3, and electrically controlled by the PSEU.
The nose gear is a forward retracting assembly. The nose gear and forward nose gear doors are
hydraulically actuated by hydraulic system 3, and electrically controlled by the PSEU.
A manual landing gear extension feature is provided.
LANDING GEAR/BRAKES
Description
Vol. 2 15−10−1
REV 66, Feb 01/07
CL−604 Operating Manual
PSP 604−6
LANDING GEAR (CONT'D)
Components
Main Landing Gear (MLG)
Each main gear assembly consists of:
• Main beam
• Nitrogen-charged/oil-filled shock strut
• Trailing links
• MLG actuator
• Internal downlock mechanism
• Axle, brake, and wheel assemblies
• Uplock pins
• MLG doors
• Weight-on-wheels proximity sensors
Main Wheel Bins
Each main gear assembly retracts inward into wheel bins recessed in the main landing gear
bay. Each wheel contains a single-loop overheat detection wire, to provide an EICAS warning
should a wheel overheat occur.
MLG Uplocks and Downlocks
The MLG is held in the up-and-locked position by mechanical uplocks. With the gear extended,
internal locking mechanisms within the MLG actuators lock the gear in the down position. On
the ground, MLG ground locking pins can be inserted into the MLG actuator.
MLG Doors
MLG doors, mechanically attached to each of the MLG struts, allow for partial enclosure of the
gear when retracted. In the retracted position, brush seals on the door and wheel bins provide
an aerodynamic seal between the tires and the surrounding aircraft structures.
MLG Weight-on-Wheels (WOW) Sensors
Two WOW proximity sensors are incorporated in each main gear assembly. They are used to
prevent landing retraction on the ground, and they provide “ground” or “air” status for other
aircraft systems via the PSEU.
LANDING GEAR/BRAKES
Description
Vol. 2 15−10−2
REV 66, Feb 01/07
CL−604 Operating Manual
PSP 604−6
LANDING GEAR (CONT'D)
Main Landing Gear
Figure 15−10−2
Nose Landing Gear (NLG)
The nose gear consists of:
• Nose gear shock strut (nitrogen-charged/oil filled)
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
庞巴迪挑战者604操作手册 Operating Manual 4(47)
