• 热门标签

当前位置: 主页 > 航空资料 > 空管资料 >

时间:2010-06-30 09:17来源:蓝天飞行翻译 作者:admin
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

Features::Navaids
Points::Navaids]
Definition
Navaid equipment monitoring information.
Properties
NavaidEquipmentMonitoring
(extends: PropertiesWithSchedule)
^
monitored CodeYesNoType Navaid equipment is monitored or not.
Used by
NavaidEquipment
See diagrams: 1 - Navaid
NavaidOperationalStatus
(extends: PropertiesWithSchedule)
^
<<object>> [Logical
View::AIXM::AIXM
Features::Navaids
Points::Navaids]
Definition
Navaid operational status information.
Properties
operationalStatus CodeStatusNavaidType Indicates the state of the navaid.
signalType CodeRadioSignalType The type of signal that is affected by
the operational status.
Used by
Navaid
NavaidEquipment
See diagrams: 1 - Navaid
NavigationArea ^
<<feature>> [Logical View::AIXM::AIXM
Features::Procedure::Departure
Procedure]
Definition
An area specified by sectors with altitude or procedure descent gradient limitations
NavigationArea ^
for omnidirectional departures or Pilot navigation area.
Properties
navigationAreaType CodeNavigationAreaType Indicates what type of
area is defined;
omnidirectional area,
pilot navigation area.
minimumCeiling ValDistanceVerticalType The minimum cloud
base needed when
using this departure
navigation area.
minimumVisibility ValDistanceType The minimum visibility
needed when using
this departure
navigation area.
departure StandardInstrumentDeparture(0..1) (ICAO) A designated
instrument flight rule
(IFR) departure route
linking the aerodrome
or a specific runway of
the aerodrome with a
specified significant
point, normally on a
designated ATS route,
at which the en-route
phase of a flight
commences.
sector NavigationAreaSector(0..*) A subdivision of the
Navigation Area
designed to provide
safety.
centrePoint SignificantPoint(0..1) The point which the
navigation area is
based on.
annotation Note(0..*)
Used by
See diagrams: 2 - NavigationArea
NavigationAreaRestriction ^
NavigationAreaRestriction ^
<<feature>> [Logical View::AIXM::AIXM
Features::Procedure::Procedure
Overview]
Definition
Areas that are restricted from use for a procedure. Example is restricted areas
defined for an omnidirectional departure.
Properties
type CodeNavigationAreaRestrictionType Indicated the type of
restriction area
procedure Procedure(0..*) A series of
predetermined
manoeuvres with
specified protection from
obstacles
designSurface ObstacleAssessmentArea(0..1) An evaluation area used
when designing a
procedure to insure
safety of aircraft
sectorDefinition CircleSector(0..1) The non geographical
representation of the
Assessment Area.
annotation Note(0..*)
Used by
See diagrams: 1 - Overview
2 - RestrictedNavigationArea
NavigationAreaSector ^
<<object>> [Logical View::AIXM::AIXM
Features::Procedure::Departur
e Procedure]
Definition
Subdivision of a sector to allow for different altitudes or gradients.
Properties
NavigationAreaSector ^
sectorDefinition CircleSector(0..1) A non graphical definition
describing a portion of a
navigation area.
significantObstacle Obstruction(0..*) The obstacle that controls
the altitude definition of the
sector or would penetrate
the 40:1 OCS.
extent Surface(0..1) The surface extent of the
navigation area sector.
sectorCriteria SectorDesign(0..*) The sector criteria used to
define a navigation area
sector.
annotation Note(0..*)
Used by
NavigationArea
See diagrams: 2 - NavigationArea
NavigationSystemCheckpoint ^
<<feature>> [Logical View::AIXM::AIXM
Features::Navaids
Points::Navaids]
Note: This is an Abstract
class
Definition
A point established and marked on the surface of an aerodrome allowing the
checking of a navigation system (like VOR, GNSS, etc.) or initialisation of an inertial
navigation system.
Properties
category CodeCheckpointCategoryType Indicates the position of
the checkpoint; airborne
or ground
upperLimit ValDistanceVerticalType Indicating the upper limit
of the block in which the
check should be
conducted.
upperLimitReference CodeVerticalReferenceType A code indicating the
NavigationSystemCheckpoint ^
reference for a vertical
distance. Two series of
values exist: 1) real
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:AIXM_51_final(120)