曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
Meteorology ^
Properties
flightConditions CodeMeteoConditionsType An overall
indication
whether the
meteorologic
al conditions
allow visual
or
instrumental
operations.
visibility ValDistanceType The greatest
distance at
which lights
of 1,000
candelas can
be seen and
identified
against an
unlit
background
(as reported
by the
airport).
visibilityInterpretation CodeValueInterpretationType Indicates
whether the
visibility is a
minimum or a
maximum
value.
runwayVisualRange ValDistanceType The distance
over which a
pilot of an
aircraft on the
centreline of
the runway
can see the
runway
surface
markings or
the lights
delineating
the runway or
identifying its
centre line.
runwayVisualRangeInterpretation CodeValueInterpretationType Indicates
whether the
Meteorology ^
RVR is a
minimum or
maximum
value.
annotation Note(0..*)
Used by
ConditionCombination
FlightConditionElementChoice
See diagrams: 3 - AirportHeliport Availability
2 - Flight Restriction - conditions
Minima ^
<<object>> [Logical View::AIXM::AIXM
Features::Procedure::Approach
Procedure::5 - Minima]
Definition
Vertical and horizontal visual minimums for a procedure segment conditions such
as aircraft category, navigation equipment usage, procedure type, altimeter, etc.
Properties
altitude ValDistanceVerticalType The lowest
altitude used in
establishing
compliance with
obstacle
clearance
criteria. The
lowest altitude
an aircraft flies
before making a
decision to land
or abort and
take the missed
approach.
(Highest of the
lower limit
altitudes in
controlling
obstacles plus
the altitude
Minima ^
adjustments
(operational
factors))
altitudeCode CodeMinimumAltitudeType An indication of
the meaning of
the altitude
value, such as
obstacle
clearance
altitude or
decision
altitude.
altitudeReference CodeVerticalReferenceType A code
indicating the
reference for
the altitude.
height ValDistanceVerticalType The height
value for the
minimum
militaryHeight ValDistanceVerticalType The height
value for the
minimum used
by militaries,
such as DoD in
United States.
radioHeight ValDistanceVerticalType The height
reported by a
radio altimeter.
Applies to CAT
II.
heightCode CodeMinimumHeightType An indication of
the meaning of
the height
value, such as
obstacle
clearance
height or
decision height.
heightReference CodeHeightReferenceType The reference
surface for the
height value.
visibility ValDistanceType The minimum
visibility needed
Minima ^
to land at the
airport when
using the
specified
altitude and/or
height.
militaryVisibility ValDistanceType The visibility
value applicable
to the military
height.
mandatoryRVR CodeYesNoType Indicates
visibility
measurement
type.
remoteAltimeterMinima CodeYesNoType Indicates if this
minima is the
primary.
adjustmentINOP EquipmentUnavailableAdjustment(0..*) The inoperable
equipment
annotation Note(0..*)
Used by
ApproachCondition
See diagrams: 1 - Minima
1 - Final Segment Leg Conditions
1 - Circling
MissedApproachGroup ^
<<object>> [Logical View::AIXM::AIXM
Features::Procedure::Approac
h Procedure::1 - Approach]
Definition
Properties of the Missed Approach
Properties
instruction TextInstructionType Operational
instructions that must
be observed when
MissedApproachGroup ^
flying the Missed
Approach.
alternateClimbInstruction TextInstructionType A second climb-toaltitude
provided on a
missed approach
based off the remote
altimeter source. It is
provided when the
40:1 surface can not
be cleared. For
example, (6,100 when
using
Denver/Stapleton
altimeter setting) is a
parenthetical
instruction.
alternateClimbAltitude ValDistanceVerticalType The altitude for the
alternate climb
instruction. (In PANSOPS
and TERPS
design this is the 40:1
surface penetration -
second climb to
altitude.)
altimeter AltimeterSource(0..*) A source for
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
AIXM_51_final(117)
