• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2010-06-21 21:38来源:蓝天飞行翻译 作者:admin
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

EFFECTIVITY
GUN ALL 78-31-00
Page 31
D633A101-GUN Feb 10/2006
BOEING PROPRIETARY - Copyright#- Unpublished Work - See title page for details.
CFM56 ENGINES (CFM56-7) 737-600/700/800/900 AIRCRAFT MAINTENANCE MANUAL
78-31-00-010
General
Each T/R cowl (half) has three access doors.
You remove the access doors to get access to the T/R hydraulic
actuator’s aft attach point.
The center access door also supplies an exit for fan air exhaust
if it goes by the bullnose seal when the T/R is in the stow
position. Refer to the bullnose seal and retainer page in the
section for more information.
THRUST REVERSER - ACCESS DOORS
EFFECTIVITY
GUN ALL 78-31-00
Page 32
D633A101-GUN Feb 10/2006
BOEING PROPRIETARY - Copyright#- Unpublished Work - See title page for details.
CFM56 ENGINES (CFM56-7) 737-600/700/800/900 AIRCRAFT MAINTENANCE MANUAL
78-31-00-014
THRUST REVERSER - ACCESS DOORS
THRUST REVERSER - ACCESS DOORS
EFFECTIVITY
GUN ALL 78-31-00
Page 33
D633A101-GUN Feb 10/2006
BOEING PROPRIETARY - Copyright#- Unpublished Work - See title page for details.
CFM56 ENGINES (CFM56-7) 737-600/700/800/900 AIRCRAFT MAINTENANCE MANUAL
78-31-00-014
Purpose
The T/R auxiliary and main track liners hold the sliders which
let the translating sleeves move forward and aft.
Location
The auxiliary and main tracks are on the upper and lower hinge
beams of each T/R half. The liners are inside of the tracks.
Physical Description
Each track has a liner inside. The track liners are stainless
steel. The tracks are an aluminum alloy.
Training Information Point
You must remove the translating sleeve to do a complete
inspection of the liners. You must also remove the translating
sleeve to replace the track liners.
WARNING: DO THE DEACTIVATION PROCEDURE FOR THE
THRUST REVERSER TO PREVENT THE
OPERATION OF THE THRUST REVERSER. THE
ACCIDENTAL OPERATION OF THE THRUST
REVERSER CAN CAUSE INJURIES TO PERSONS
OR DAMAGE TO EQUIPMENT.
THRUST REVERSER - AUXILIARY AND MAIN TRACK LINER
EFFECTIVITY
GUN ALL 78-31-00
Page 34
D633A101-GUN Feb 10/2006
BOEING PROPRIETARY - Copyright#- Unpublished Work - See title page for details.
CFM56 ENGINES (CFM56-7) 737-600/700/800/900 AIRCRAFT MAINTENANCE MANUAL
78-31-00-015
THRUST REVERSER - AUXILIARY AND MAIN TRACK LINER
THRUST REVERSER - AUXILIARY AND MAIN TRACK LINER
EFFECTIVITY
GUN ALL 78-31-00
Page 35
D633A101-GUN Feb 10/2006
BOEING PROPRIETARY - Copyright#- Unpublished Work - See title page for details.
CFM56 ENGINES (CFM56-7) 737-600/700/800/900 AIRCRAFT MAINTENANCE MANUAL
78-31-00-015
Purpose
The auxiliary and main track sliders permit the translating
sleeves to move forward and aft in the tracks.
Location
The auxiliary and main track sliders are on the top and the
bottom of each translating sleeve.
Physical
The sliders have a wear surface that reduces the friction
between the sliders and the track liners.
Training Information Point
You must remove the translating sleeve to do a complete
inspection of the sliders. You must also remove the translating
sleeve to replace the sliders or the wear surfaces.
WARNING: DO THE DEACTIVATION PROCEDURE FOR THE
THRUST REVERSER TO PREVENT THE
OPERATION OF THE THRUST REVERSER. THE
ACCIDENTAL OPERATION OF THE THRUST
REVERSER CAN CAUSE INJURIES TO PERSONS
OR DAMAGE TO EQUIPMENT.
THRUST REVERSER - AUXILIARY AND MAIN TRACK SLIDER
EFFECTIVITY
GUN ALL 78-31-00
Page 36
D633A101-GUN Feb 10/2006
BOEING PROPRIETARY - Copyright#- Unpublished Work - See title page for details.
CFM56 ENGINES (CFM56-7) 737-600/700/800/900 AIRCRAFT MAINTENANCE MANUAL
78-31-00-016
THRUST REVERSER - AUXILIARY AND MAIN TRACK SLIDER
THRUST REVERSER - AUXILIARY AND MAIN TRACK SLIDER
EFFECTIVITY
GUN ALL 78-31-00
Page 37
D633A101-GUN Feb 10/2006
BOEING PROPRIETARY - Copyright#- Unpublished Work - See title page for details.
CFM56 ENGINES (CFM56-7) 737-600/700/800/900 AIRCRAFT MAINTENANCE MANUAL
78-31-00-016
General
The rubstrips are the interface between the translating sleeve
and these areas of structure:
* T/R torque box
* Hinge (upper) beam.
These rubstrips are the interface between the engine fan cowl
and these areas of structure:
* T/R torque box
* Hinge (upper) beam
* Latch beam.
Location
All rubstrips are along the forward or aft side of the T/R torque
box.
THRUST REVERSER - RUBSTRIP
EFFECTIVITY
GUN ALL 78-31-00
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:ENGINE EXHAUST(14)