曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
7-7-51
Figure 7-7-45. 98 and 100% Rotor RPM, –20C, 10,000 Feet
TM 1-1520-240-10
7-7-52
Figure 7-7-46. 100% Rotor RPM, –10 and 0C, 10,000 Feet
TM 1-1520-240-10
7-7-53
Figure 7-7-47. 100% Rotor RPM, 10 and 20C, 10,000 Feet
TM 1-1520-240-10
7-7-54
Figure 7-7-48. 100% Rotor RPM, 30 and 40C, 10,000 Feet
TM 1-1520-240-10
7-7-55
Figure 7-7-49. 100% Rotor RPM, 50C, 10,000 Feet
TM 1-1520-240-10
7-7-56
Figure 7-7-50. 98 and 100% Rotor RPM, –50C, 12,000 Feet
TM 1-1520-240-10
7-7-57
Figure 7-7-51. 98 and 100% Rotor RPM, –40C, 12,000 Feet
TM 1-1520-240-10
7-7-58
Figure 7-7-52. 98 and 100% Rotor RPM, –30C, 12,000 Feet
TM 1-1520-240-10
7-7-59
Figure 7-7-53. 98 and 100% Rotor RPM, –20C, 12,000 Feet
TM 1-1520-240-10
7-7-60
Figure 7-7-54. 100% Rotor RPM, –10 and 0C, 12,000 Feet
TM 1-1520-240-10
7-7-61
Figure 7-7-55. 100% Rotor RPM, 10 and 20C, 12,000 Feet
TM 1-1520-240-10
7-7-62
Figure 7-7-56. 100% Rotor RPM, 30 and 40C, 12,000 Feet
TM 1-1520-240-10
7-7-63
Figure 7-7-57. 100% Rotor RPM, 50C, 12,000 Feet
TM 1-1520-240-10
7-7-64
Figure 7-7-58. 98 and 100% Rotor RPM, -50C, 14,000 Feet
TM 1-1520-240-10
7-7-65
Figure 7-7-59. 98 and 100% Rotor RPM, –40C, 14,000 Feet
TM 1-1520-240-10
7-7-66
Figure 7-7-60. 98 and 100% Rotor RPM, –30C, 14,000 Feet
TM 1-1520-240-10
7-7-67
Figure 7-7-61. 98 and 100% Rotor RPM, –20C, 14,000 Feet
TM 1-1520-240-10
7-7-68
Figure 7-7-62. 100% Rotor RPM, –10 and 0C, 14,000 Feet
TM 1-1520-240-10
7-7-69
Figure 7-7-63. 100% Rotor RPM, 10 and 20C, 14,000 Feet
TM 1-1520-240-10
7-7-70
Figure 7-7-64. 100% Rotor RPM, 30 and 40C, 14,000 Feet
TM 1-1520-240-10
7-7-71
Figure 7-7-65. 100% Rotor RPM, 50C, 14,000 Feet
TM 1-1520-240-10
7-7-72
Figure 7-7-66. 98 and 100% Rotor RPM, –50C, 16,000 Feet
TM 1-1520-240-10
7-7-73
Figure 7-7-67. 98 and 100% Rotor RPM, –40C, 16,000 Feet
TM 1-1520-240-10
7-7-74
Figure 7-7-68. 98 and 100% Rotor RPM, –30C, 16,000 Feet
TM 1-1520-240-10
7-7-75
Figure 7-7-69. 98 and 100% Rotor RPM, –20C, 16,000 Feet
TM 1-1520-240-10
7-7-76
Figure 7-7-70. 100% Rotor RPM, –10 and 0C, 16,000 Feet
TM 1-1520-240-10
7-7-77
Figure 7-7-71. 100% Rotor RPM, 10 and 20C, 16,000 Feet
TM 1-1520-240-10
7-7-78
Figure 7-7-72. 100% Rotor RPM, 30 and 40C, 16,000 Feet
TM 1-1520-240-10
7-7-79
Figure 7-7-73. 98 and 100% Rotor RPM, –50C, 18,000 Feet
TM 1-1520-240-10
7-7-80
Figure 7-7-74. 98 and 100% Rotor RPM, –40C, 18,000 Feet
TM 1-1520-240-10
7-7-81
Figure 7-7-75. 98 and 100% Rotor RPM, –30C, 18,000 Feet
TM 1-1520-240-10
7-7-82
Figure 7-7-76. 98 and 100% Rotor RPM, –20C, 18,000 Feet
TM 1-1520-240-10
7-7-83
Figure 7-7-77. 98 and 100% Rotor RPM, –10 and 0C, 18,000 Feet
TM 1-1520-240-10
7-7-84
Figure 7-7-78. 98 and 100% Rotor RPM, 10 and 20C, 18,000 Feet
TM 1-1520-240-10
7-7-85
Figure 7-7-79. 98 and 100% Rotor RPM, –50C, 20,000 Feet
TM 1-1520-240-10
7-7-86
Figure 7-7-80. 98 and 100% Rotor RPM, –40C, 20,000 Feet
TM 1-1520-240-10
7-7-87
Figure 7-7-81. 98 and 100% Rotor RPM, –30C, 20,000 Feet
TM 1-1520-240-10
7-7-88
Figure 7-7-82. 98 and 100% Rotor RPM, –20C, 20,000 Feet
TM 1-1520-240-10
7-7-89
Figure 7-7-83. 100% Rotor RPM, –10 and 0C, 20,000 Feet
TM 1-1520-240-10
7-7-90
Figure 7-7-84. 100% Rotor RPM, 10 and 20C, 20,000 Feet
TM 1-1520-240-10
7-8-1
SECTION VIII. DRAG
7-8-1. Description.
The drag chart (fig. 7-8-1) shows the torque change required
for flight due to drag area change as a result of
external configuration changes.
7-8-2. Use of Charts.
The primary use of the chart is illustrated by the example.
To determine the change in torque, it is necessary to
know the drag area change, TAS, PA, and FAT. From the
table below find the drag area change associated with
the configuration, or estimate if necessary. Enter chart
at known drag area change, move right to TAS, move
down to PA, move left to FAT, then move down and read
change in engine torque.
7-8-3. Conditions.
The drag chart is based on operating at 100% RRPM.
Table 7-8-1. Change in Drag Area of Typical External
Loads
LOAD
DRAG
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
支奴干运输直升机操作手册2(12)
