曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
Altitude dial:
- The altitude dial is calibrated from O to 1000 meters
with 50 meter graduations.
Baro correction counter:
- The baro correction is displayed on a the lower
counter and is graduated in hecto Pascals.
Adjustment baro setting knob:
- The knob enables adjustment of the baro setting in
the range of 870 to 1050 hecto Pascals.
TMUNAVE03-T05 LEVEL 1
EFFECTIVITY 34-20-00 Page 10
Mar 31/00
_A319/A320/A321 TECHNICAL TRAINING MANUAL
MECHANICS / ELECTRICS & AVIONICS COURSE 34 NAVIGATION
UF94200
EFFECTIVITY Page 28
ALL
TMUNAVE03-P05 LEVEL 1
STANDBY INSTRUMENT PRESENTATION - METRIC ALTIMETER (OPTION)
EFFECTIVITY 34-20-00 Page 11
Mar 31/00
_A319/A320/A321 TECHNICAL TRAINING MANUAL
MECHANICS / ELECTRICS & AVIONICS COURSE 34 NAVIGATION
UF94200
EFFECTIVITY Page 29
ALL
THIS PAGE INTENTIONALLY LEFT BLANK
TMUNAVE03 LEVEL 1
EFFECTIVITY 34-20-00 Page 12
Mar 31/00
_A319/A320/A321 TECHNICAL TRAINING MANUAL
MECHANICS / ELECTRICS & AVIONICS COURSE 34 NAVIGATION
UF94200
EFFECTIVITY Page 30
ALL
34 - NAVIGATION
34-00-00 RADIO MANAGEMENT PANEL (RMP)
PRESENTATION
CONTENTS:
General
Standby Navigation Keys
Rotating Knob
Standby/Course (STBY/CRS) Window
Active Window
TMUNA2201 LEVEL 1
EFFECTIVITY 34-00-00 Page 1
Mar 31/00
_A319/A320/A321 TECHNICAL TRAINING MANUAL
MECHANICS / ELECTRICS & AVIONICS COURSE 34 NAVIGATION
UF94200
EFFECTIVITY Page 31
ALL
RADIO MANAGEMENT PANEL (RMP) PRESENTATION
GENERAL
The radio Nav frequency selection can only be performed
when the guarded NAV key LED is on, after a dual FMGS
loss
The ON/OFF switch controls the power supply of the
RMP.
STANDBY NAVIGATION KEYS
As long as the NAV key is the only STBY NAV key selected,
the windows still display communication frequencies.
Then, pressing the VOR, ILS or ADF key changes the
displays to the last RMP memorized values (frequency
and course).
At any time, communication frequencies are still
selectable, simply by pressing the corresponding key.
Beat Frequency Oscillator (BFO) is set on or off by
pressing the key.
NOTE: The Microwave Landing System (MLS) key is a
provision.
ROTATING KNOB
Two concentric knobs allow preselection of frequency
for radio communication and standby navigation systems
and selection of the required course for VORs and ILSs:
- the outer knob controls the most significant
digits,
- the inner knob controls the least significant
digits.
The desired frequency or course is set in the STBY/CRS
window. Frequency becomes active by pressing the
transfer key.
STANDBY/COURSE (STBY/CRS) WINDOW
The STANDBY/COURSE window displays a standby frequency
or a course.
Both can be changed by rotating the knob, but only the
standby frequency can be made active by pressing the
transfer key.
If a course is displayed, the associated frequency is
displayed in the ACTIVE window.
NOTE: If a course is displayed on the STBY/CRS window,
pressing the transfer key will display the ACTIVE
frequency in both windows.
ACTIVE WINDOW
The active window shows the frequency in use of the
system identified by the green LED on the selected
key.
TMUNA2201-T01 LEVEL 1
EFFECTIVITY 34-00-00 Page 2
Mar 31/00
_A319/A320/A321 TECHNICAL TRAINING MANUAL
MECHANICS / ELECTRICS & AVIONICS COURSE 34 NAVIGATION
UF94200
EFFECTIVITY Page 32
ALL
RADIO MANAGEMENT PANEL (RMP) PRESENTATION
TMUNA2201-P01 LEVEL 1
EFFECTIVITY 34-00-00 Page 3
Mar 31/00
_A319/A320/A321 TECHNICAL TRAINING MANUAL
MECHANICS / ELECTRICS & AVIONICS COURSE 34 NAVIGATION
UF94200
EFFECTIVITY Page 33
ALL
THIS PAGE INTENTIONALLY LEFT BLANK
TMUNA2201 LEVEL 1
EFFECTIVITY 34-00-00 Page 4
Mar 31/00
_A319/A320/A321 TECHNICAL TRAINING MANUAL
MECHANICS / ELECTRICS & AVIONICS COURSE 34 NAVIGATION
UF94200
EFFECTIVITY Page 34
ALL
34 - NAVIGATION
34-00-00 DDRMI PRESENTATION
CONTENTS:
General
Normal Operation
Failure and Non Computed Data (NCD)
Self Examination
TMUNAVF02 LEVEL 1
EFFECTIVITY 34-00-00 Page 1
Mar 31/00
_A319/A320/A321 TECHNICAL TRAINING MANUAL
MECHANICS / ELECTRICS & AVIONICS COURSE 34 NAVIGATION
UF94200
EFFECTIVITY Page 35
ALL
DDRMI PRESENTATION
GENERAL
The Digital Distance and Radio Magnetic Indicator
(DDRMI) is located on the center instrument panel.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
ATA 34 NAVIGATION(6)
