INSTRUCTOR ONLY INSTRUCTOR ONLY
CCQ FFS SESSION GUIDE
. 1: During preparation, point out the location of controls and indicators : -Landing gear (additional center gear)
-
Fuel
-
Electric
-
Hydraulic
-
Pneumatic
-
Fire panel
. 7, 26 : Emphasize use of reversers (interlock mechanism)
. 11, 30: Use maximum weight parameters to justify Jettison after engine failure. Change take off conf : 1 + F
. 13 : Set GW : 250 t
Point out :
Green dot is higher than VFE conf 1. Therefore apply VFE next procedure.
Extend flaps until final configuration for demonstration.
Return to Green dot and clean the aircraft after demonstration.
Restore slats failure.
. 18 : Demonstrate VLS increasing to VMCL-2.
. 39 : Order a go around reaching Commit altitude.
A340-600 CCQ A330 TO A340 COURSE SIMULATOR COURSE SYLLABI 02.03 C FQG Page 2A
FLIGHT CREW TRAINING PROGRAM Issue 04 DEC 2007
CCQ FFS SESSION PREPARATION
01 - SESSION OBJECTIVE
.
To study A340 specific changes in panels and controls during cockpit preparation.
.
To handle the A340 in normal operations
.
To practice the 1 engine and 2 engine out operation.
02 - TRAINING TOPICS
A. REVIEW
(Not applicable)
B. EXERCISES / REFERENCES
EVENT FCOM QRH
- Engine start sequence 3.03.08
- Landing - Reverser logic 1.70.70 -3.03.22
- Fuel Jettison 3.02.28 - 3.04.28 - 4.03.20 2.00
-2 Engine out operation 3.02.10 - 3.07.10 1.00 - 2.00 4.00
C. SESSION SUPPORT
.
FCOM / QRH
.
FCTM
.
Laptop : fuel monitoring
03 - SESSION PROFICIENCY CRITERIA
. Demonstrate the ability to perform all exercises, using the correct procedure and techniques in accordance with SOPs.
A340-600 CCQ A330 TO A340 COURSE SIMULATOR COURSE SYLLABI 02.03 C FQG Page 2B
FLIGHT CREW TRAINING PROGRAM Issue 04 DEC 2007
INSTRUCTOR ONLY INSTRUCTOR ONLY
CCQ FFS SESSION GUIDE
. 1: During preparation, point out the location of controls and indicators : -Landing gear (additional center gear)
-Fuel - NWS - Brake panel -Electric - ECAM pages
-
Hydraulic -TCAS
-
Pneumatic
-
Fire panel
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A340 FLIGHT CREW TRAINING PROGRAM CCQ A330 TO A340 COURSE A340机组训练大纲交叉驾驶资格(5)