Bell Helicopter ALERT SERVICE BULLETIN:TURBOSHAFT ENGINE COMPRESSOR DISC INSPECTION OF AND RETAINING NUT REPLACEMENT(5)

曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

For the PT Stator 
MS9696-07 Bolt, Machined  MS9696-07  16  10.61  (C)(D) 
For the FMM 
3116632-01  Gasket  3116632-01  1  32.70  (C) 
AS3209-113  Packing, Preformed  AS3209-113  1  0.80  (C) 

PW206B, PW206C incorporating P&WC S.B. No. 28187 and PW206B2, PW207C, PW207D, PW207E, PW207K
For the PT Stator
ST3149-09  Nut, Self-Locking (IC) (SB ST3149-09 16 51.73 (C)(D) 28187)
3044632-01  Seal Ring, Metal (SB 3044632-01 1 433.40 (C) 28187)
PW206B, PW206B2, PW207D, PW207K For the Fuel Heater
AS3209-145 Packing, Preformed AS3209-145 1 5.56 (C) ST3081-10 Nut Option (IC) ST3081-10 4 28.36 (C)(D)

PW206B, PW206B2
P&WC Proprietary Information. Subject to the restrictions on the back of the locator.
Apr 28/2006 PW200-72-28280

Page5of12
PRATT & WHITNEY CANADA

SERVICE BULLETIN

P&WC S.B. No. 28280
TURBOSHAFT ENGINE
COMPRESSOR DISC INSPECTION OF AND RETAINING NUT REPLACEMENT

New P/N  Keyword  Old P/N  Qty  Est. Unit List Price ($US, 2006)  Instructions Disposition 
AS3209-029  Packing, Preformed (Oil Seal Carrier Input Shaft Cover)  AS3209-029  1  1.03  (C) 
PW207D, PW207K 
AS3209-154  Packing, Preformed (FMM Shroud)  AS3209-154  2  9.36  (C) 
For the P3 Transfer Tube 
AS3209-010  Packing, Preformed  AS3209-010  1  0.64  (C) 
AS3209-012  Packing, Preformed  AS3209-012  1  0.87  (C) 
For the P3 Tube Shroud 
AS3209-124  Packing, Preformed  AS3209-124  1  1.99  (C) 
For the P3 Tube 
3014453  Packing With Retainer  3014453  2  4.66  (C) 
For the Fuel Transfer Tube 
AS3209-10  Packing, Preformed  AS3209-010  1  0.64  (C) 
AS3209-12  Packing, Preformed  AS3209-012  1  0.87  (C) 
For the Fuel Tube Shroud 
AS3209-124  Packing, Preformed  AS3209-124  1  1.99  (C) 
For the Fuel Tube 
3014453  Packing With Retainer  3014453  2  4.66  (C) 

(A)  
RESTRICTED INTERCHANGEABILITY -(ATA 200 Explanation Code 07): All the old parts must be replaced by all the new parts as an assembly.

(B)  
Discard. Do not use again in any application.

(C)  
Standard replacement part.

(D)  
Recommended quantity: P/N ST3032-09 (1), P/N 3015234 (8), P/N MS9696-08 (2), P/N MS9696-07 (2), P/N ST3149-09 (4), ST3081-10 (1)

E. Reidenti.ed Parts
None.
P&WC Proprietary Information. Subject to the restrictions on the back of the locator.
　
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：Bell Helicopter ALERT SERVICE BULLETIN:TURBOSHAFT ENGINE COMPRESSOR DISC INSPECTION OF AND RETAINING NUT REPLACEMENT(5)