曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
TIME. Directly enter the two digit destination number or
use the INC or DEC keys.
(2) Set MODE switch to GPS LDG.
(3) The DISPLAY switch continues to function
as before. To switch between metric and English units,
depress the ENT key.
TM 1-1520-240-10
3-3-32
NOTE
In this mode, the DGNS provides real-time
landing guidance information to the HSI indicator.
To display course deviation indication
(CDI) on VSI and HSI, depress then release
the DPLR GPS button on the HSI Mode Select
Panel.
j. Procedure for Transferring Stored Destination/Target
Data From One Location to Another.
The following procedure allows the operator to transfer
stored destination/target data from one destination/target
location to another destination location. The transferred
data consists of destination name/ICAO identifier,
location, variation, and landing information. For illustrative
purposes only, it is assumed that the operator wants
to put the coordinates of stored target 97 into the location
for destination 12.
(1) Set DISPLAY switch to WP/TGT position.
(2) Depress keys 9 then 7.
(3) Depress KYBD key, depress keys 1 then 2.
NOTE
Location name/ICAO identifier, variation, and
landing data may be deleted by first displaying
the waypoint, depressing KYBD key, then
the ENT key.
(4) Depress ENT key.
k. Operation During and After a Power Interruption
During a power interruption, the stored destination and
target data and present position are retained by non-volatile
RAM inside the CDU. This makes it unnecessary to
reenter any navigation data power returns. GPS satellite
data are also retained by a rechargeable battery inside
the SDC. This makes it unnecessary to reload the crypto
key or wait for the collection of any almanac. Navigation
will be interrupted during the absence of power; however
the present position will be updated when the GPS data
becomes valid provided the DGNS mode has not been
selected as Doppler only. The pilot will have to re-enter
the GPS operating mode (M or Y) using a single key (5
or 9).
In the event the CDU is initialized, the display will indicate
only EN when the CDU is operated. This is an indication
to the operator that previously stored data has been lost
and that spheroid/variation, destinations, and calibration
data must be entered. Present position needs to be entered
only if Doppler only mode has been selected. The
KYBD key must be depressed to clear the EN.
The computer initializes to the following: operating mode
to combined, present position variation to E000.0, destinations
and associated variations to a non-entered
state, wind speed (water motion) and sea current speed
to 000, DATUM: 00, present position to N45
00.00’E000 00.00’ (until updated by GPS), target store
location to 91, along track calibration correction to 00.0
percent, and magnetic compass deviation corrections to
000.0 degrees. The following data must be entered:
(1) Depress KYBD key.
(2) Set MODE switch to OFF momentarily, to
LAMP TEST for approximately one second, and then to
MGRS or LAT/LONG.
(3) Select GPS or Y mode.
(4) Select DGNS operating mode if other than
combined.
(5) Enter datum.
(6) Enter present position if Doppler only has
been selected.
(7) Enter each destination and its associated
variation.
l. Procedure for Display Aircraft heading, Pitch, and
roll (Maintenance Function)
(1) Set the CDU mode switch to test and observe
the CDU test mode display.
(2) After the Doppler test is completed depress
the ENT key.
(3) Observe the CDU display. The top indicates
in degrees and tenths of a degree, aircraft system heading,
pitch, and roll.
Table 3-3-4. Map Datum Codes.
Map Datum Data Code
ADINDAN 01
ARC1950 02
AUSTRALIAN GEODETIC 1966 03
BUKIT RIMPAH 04
CAMP AREA ASTRO 05
DIAKARTA 06
EUROPEAN 1950 07
TM 1-1520-240-10
3-3-33
Table 3-3-4. Map Datum Codes - (Continued).
Map Datum Data Code
GEODETIC DATUM 1949 08
GHANA 09
GUAM 1963 10
G. SEGARA 11
G. SERINDUNG 12
HERAT NORTH 13
HJORSEY 1955 14
HU-TZU-SHAN 15
INDIAN 16
IRELAND1965 17
KERTAU (MALAYAN REVISED TRIANGULATION) 18
LIBERIA 19
USER ENTERED 20
LUZON 21
MERCHICH 22
MONTJONG LOWE 23
NIGERIA (MINNA) 24
NORTH-AMERICAN-1927:
CONUS 25
ALASKA AND CANADA 26
OLD HAWAIIAN:
MAUI 27
OAHU 28
KAUAI 29
ORDINANCE SURVEY OF GREAT BRITIAN 1936 30
QORNOQ 31
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
支奴干运输直升机操作手册1(113)
