• 热门标签

当前位置: 主页 > 航空资料 > 飞行资料 >

时间:2010-05-17 21:43来源:蓝天飞行翻译 作者:admin
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

selected when airplane is flying lower than 1100 feet AGL (while climbing) or 900 feet AGL
(while descending).
· TEST Mode − Pressing the TST button on the RMU, will start a selftest
program that will
verify proper operation of the TA and RA displays and of the aural advisories. The TEST
mode does not affect normal TCAS operation. Should an actual TA or RA occur during
TEST sequence, the test is automatically terminated and the advisory is announced and
displayed.
NAVIGATION
Flight Crew Operating Manual REV 41, Jul 08, 2004
CSP 700−6
Volume 2
17−10−10
TRAFFIC ALERT AND COLLISION AVOIDANCE SYSTEM (TCAS) (CONT'D)
ATC/TCAS Mode Select
ATC/TCAS operations are controlled by the adjacent line select keys and the tuning knobs.
The modes are:
· ATC ON − Replies on Modes S and A, no altitude reporting.
· ATC ALT − Replies on Modes A, C and S, with altitude reporting.
· STANDBY − Transponder in standby mode.
· TA ONLY − TCAS traffic advisory mode selected.
· TA/RA − TCAS traffic advisory/resolution advisory mode selected.
0 1000
1
2
3
1
2
3
DME
RANGE:
118.02
MEMORY−4
TA ONLY
NB
NORMAL
ADF
LV
6
ATC/TCAS ADF1
TCAS DSPY 1 HF1
COM1 NAV1
121.82 108.30
1200 1799.5
15423
15600
IZZ
111.90
TA ONLY
NOTE
Pressing adjacent line key
will annunciate STBY or
displayed mode.
NOTE
Rotating the tuning knob will select ATC
ON, ATC ALT, TA ONLY or TA/RA.
GF1710_017
The PGE function key provides access to a menu page. The menu allows access to the TCAS
operational selections.
ATC/TCAS CONTROL PAGE
INTRUDER ALTITUDE: REL
TA DISPLAY ; AUTO
ATC ALT: 1 2500
RETURN TO
RADIOS
INTRUDER ALTITUDE
REL Targets altitude displayed relative to one’s own airplane.
− F L Targets altitude displayed as a flight level, for 20 seconds,
then returns to REL.
TA DISPLAY
AUTO Traffic targets displayed only when a TA or RA target
condition exists.
MANUAL All traffic targets displayed within the viewing airspace.
RETURN TO
RADIOS
Returns to main tuning page.
ATC ALT
1, (2) Indicates that the transponder selected on the main tuning
page is communicating at a displayed pressure altitude.
This is not a control feature, only a cross check.
GF1710_018
NAVIGATION
REV 41, Jul 08, 2004 Flight Crew Operating Manual
CSP 700−6
Volume 2
17−10−11
TRAFFIC ALERT AND COLLISION AVOIDANCE SYSTEM (TCAS) (CONT'D)
TCAS DSPY 1 (2) Select
The primary TCAS selection is selected via the adjacent line select keys. The TCAS selections are
as follows:
· Range − Selectable at 6, 12, 20 and 40 NM.
· Altitude Band Select −
NORMAL: With TA display set to AUTO, ± 1200 feet TCAS display altitude.
With TA display set to MANUAL, ± 2700 feet TCAS display altitude.
ABOVE: +7000 feet, −2700 feet TCAS display altitude.
BELOW: −7000 feet, +2700 feet TCAS display altitude.
RANGE:
118.02
MEMORY−4
NB
6
NORMAL
1 ATC ALT ADF
LV
ATC/TCAS ADF1
TCAS DSPY 1 HF1
COM1 NAV1
121.82 108.30
1200 1799.5
15423
15600
DME IZZ
111.90
NOTE
GF1710_019
Rotate the tuning knob to change the
range when adjacent line select key
is selected.
Rotate the tuning knob to change the altitude
band select when adjacent line select key
is selected.
TCAS Mode Select Annunciation
The indications for intruder alert and altitude band selections are as follows:
GF1710_020
REL
4000
KDVT
1+36
12.5
KDVT
ABOVE
ETE
NM
TOC KPHX
KSRP
4000
FL180
ABOVE
6
+10
REL
TCAS Zoom Window MFD (MAP format)
NAVIGATION
Flight Crew Operating Manual REV 41, Jul 08, 2004
CSP 700−6
Volume 2
17−10−12
TRAFFIC ALERT AND COLLISION AVOIDANCE SYSTEM (TCAS) (CONT'D)
TCAS Mode Select Annunciation (Cont’d)
The indications for TCAS TEST are as follows:
−04
+12
+10
360
−11
−03
+20
+03
TCAS TEST
6
12.5 NM
TCAS TEST
N
20 20
30
6
33
3
GF1710_021 TCAS TEST (
when test initiated), then
TCAS TEST PASS
or
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:庞巴迪挑战者手册7(104)