曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
turbulence mode
Illuminates the TURB button status
indicator lights when turbulence
mode is selected
NOTE: Mode clears when localizer
is captured or when autopilot is
disengaged.
AUTOMATIC FLIGHT CONTROL SYSTEM
4-52 For Training Purposes Only
Sept 04
P I LOT T R A I N I N G GU I D E
Flight Control Panel (FCP) - Lateral Modes
Flight Control Panel (FCP) - Flight Director Lateral Modes
Figure 4-39
FLC
SPEED
NAV HDG APPR
1/2 BANK
HDG
B/C
ALT
CRS1 ALT CRS2
FD VS FD
VNAV
DOWN
UP
XFR
TURB AP DISC
AP ENG
PUSH
DIRECTIAS/MACH
PUSH
SYNC
PUSH
CANCEL
PUSH
D
IRECT
FLIGHT CONTROL PANEL
P604_04_056
HDG Button (momentary-action)
Press:
Alternately selects or clears heading
select mode (HDG)
Illuminates the HDG button status
indicator lights when the mode is active
HDG knob
Rotate:
Push Knob Inset
Adjusts selected heading
Clockwise rotation increses the selected heading angle
– Synchronizes HDG bug
on all displays to the current aircraft heading
1/2 BANK Button (momentary-action)
Press:
Alternately selects or clears 1/2 bank mode
Illuminates the 1/2 BANK button status
indicator lights when the mode is active
NOTE: Half bank mode is cleared manually, by
approach mode capture or any localizer
capture.
NAV Button (momentary-action)
Press:
Alternately selects or clears navigation mode
Type of navigation mode is determined by the
active navigation source (VOR, LOC, FMS)
Illuminates the NAV button status indicator lights
when the mode is active
B/C Button (momentary-action)
Press:
Alternately selects or clears back course mode (BC)
Illuminates the B/C button status indicator lights
when the mode is active
APPR Button (momentary-action)
Press:
Alternately selects or clears approach mode
Type of approach is determined by the active
navigation source (VOR, ILS, FMS)
Illuminates the APPR button status indicator lights
when the mode is active
CRS1 Knob
Rotate
Push Knob Inset
– Adjusts VOR1 or LOC1 course
– Synchronizes VOR1
to provide a “direct-to” course to the
station
CRS2 Knob
Rotate
Push Knob Inset
– Adjusts VOR2 or LOC2 course
– Synchronizes VOR2
to provide a “direct-to” course to the
station
AUTOMATIC FLIGHT CONTROL SYSTEM
For Training Purposes Only
Sept 04
4-53
P I LOT T R A I N I N G GU I D E
Flight Control Panel (FCP) - Vertical Modes
Flight Control Panel (FCP) - Flight Director Vertical Modes
Figure 4-40
FLC
SPEED
NAV HDG APPR
1/2 BANK
HDG
B/C
ALT
CRS1 ALT CRS2
FD VS FD
VNAV
DOWN
UP
XFR
TURB AP DISC
AP ENG
PUSH
DIRECT
IAS/MACH
PUS
H
SYNC
PUSH
CANCEL
PUSH
DIRECT
FLIGHT CONTROL PANEL
P604_04_055
FLC Button (momentary-action)
Press:
Alternately selects or clears flight level change
mode (FLC)
Airspeed/Mach reference (bug) is synchronized
to the current airspeed/Mach value when mode
is selected
Illuminates the FLC button status indicator
SPEED Knob
Rotate:
Push inset
Adjusts the IAS/Mach reference (speed
bug)
Clockwise rotation increases IAS/Mach
reference value
Speed range is 90 kts to Vmo
Mach range is 0.14 M to Mmo
– Toggles airspeed reference
between IAS and Mach
VS Button (momentary-action)
Press:
Alternately selects or clears vertical speed mode (VS)
Vertical speed reference (bug) is synchronized to the
current vertical speed when mode is selected
Illuminates the VS button status indicator lights when
the mode is active
Vertical Speed/Pitch Wheel
Rotate:
Adjusts the vertical speed reference (bug)
when vertical speed mode is active
Vertical speed range is ±10,000 ft/min with
a resolution of 100 ft/min per click
Adjusts the pitch reference when Pitch
mode is active (0.5 degrees per click)
ALT Button (momentary-action)
Press:
Alternately selects or clears altitude hold mode (ALT)
Illuminates the ALT button status indicator lights when
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
CL_604-AUTOMATIC_FLIGHT_CONTROL_SYSTEM(20)
