曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
GF0610_039
NOTE
Cycling the DME function button will display the following in sequence:
VOR/ILS − VOR/ILS and DME − VOR/ILS and TACAN − VOR/ILS
118.02
MEMORY−4
RANGE:
DME H IZZ
NB
6
NORMAL
1 ATC ALT ADF
LV
1799.5
111.90
121.82 108.30
ATC/TCAS ADF1
HF1
COM1 NAV1
1200
15423
15600
ILS/VOR
DME Ident
TCAS DSPY 1
COMMUNICATIONS
Rev 2A, Apr 11, 2005 Flight Crew Operating Manual
CSP 700−5000−6
Volume 2
06−10−17
DIRECT COM TUNING
To direct tune the COM, press the line select key beside the preset COM frequency and hold for
approximately 3 seconds.The following events will occur:
· The cursor will first move through the TEMP−1 selection.
· The preset window will go blank.
· The cursor will appear at the active frequency allowing direct tuning.
GF0610_040
HF1
NB
131.27
TEMP−1 TEMP−1
112.00
2000
TEMP−1
112.00
2000
NB
STANDBY ANT
UV
STANDBY ANT
ALT:REL UV
NORMAL
ALT:REL
NORMAL
620.0
ADF1
NAV1
131.10
620.0
2000
ATC/TCAS
COM1
118.00
1605
ADF1
HF1
131.10
2000
NAV1
1605
ATC/TCAS
118.00
Press and hold COM1
Direct Tune
TUNE
TCAS DSPY 1 TCAS DSPY 1
To exit from direct tuning, press the line select key beside the preset COM frequency window and
hold until the preset frequency appears.
GF0610_041
131.27
TEMP−1 TEMP−1
112.00
2000
HF1
NB
STANDBY ANT
ALT:REL UV
NORMAL
ATC/TCAS ADF1
TCAS DSPY 1
COM1 NAV1
121.90 131.10
1605 620.0
2000
To EXIT
Press and hold
HF1
NB
TEMP−1
112.00
2000
STANDBY ANT
UV
ALT:REL
NORMAL
ADF1
NAV1
131.10
620.0
2000
ATC/TCAS
TCAS DSPY 1
COM1
121.90
1605
COMMUNICATIONS
Flight Crew Operating Manual Rev 2A, Apr 11, 2005
CSP 700−5000−6
Volume 2
06−10−18
COM MEMORY
Any of the memory locations displayed inside the cursor can be changed by tuning and storing a new
frequency. When the new frequency is tuned, the identifier will change from “MEMORY” to “TEMP”.
GF0610_042
121.90
MEMORY−1 TEMP−1
113.10
COM1 NB
118.00 112.00
ATC/TCAS ADF1
NAV1
TEMP−1
130.27
TEMP−1
113.10
COM1 NB NAV1
118.00 112.00
ATC/TCAS ADF1
To recall stored frequencies, select the cursor to the memory location annunciator on the main radio
page, by pushing the line select key adjacent to the preset com frequency two times. Rotate the tune
control knob to view the frequencies stored (1−12) in memory.
GF0610_043
Recall Stored
Frequencies
MEMORY−1
130.27
TEMP−1
121.90 113.10
TEMP−1 TEMP−1
113.10
COM1 NB NB
118.00 112.00
ATC/TCAS ADF1
NAV1 COM1 NAV1
118.00 112.00
ATC/TCAS ADF1
COMMUNICATIONS
Rev 3, Apr 25, 2005 Flight Crew Operating Manual
CSP 700−5000−6
Volume 2
06−10−19
COM MEMORY (CONT'D)
The temporary preselect frequency is assigned a numbered location, provided the cursor has been
first placed around the identifier. While on the main tuning page, press the function key to go
to page menu, then select the com memory page. The COM MEMORY page provides the following:
GF0610_044
COM1
118.00
130.27
151.67
133.00
2
3
1 4
5
6
INSERT
DELETE
MORE
RETURN
MEMORIES
NB NARROW
BANDWIDTH
SELECT
Active COM
Frequency
Bandwidth Select Annunciator
Memory
Location
Selectable from
Function Keys
Pressing the top right
transfer key while on the
COM memory page will
toggle the receiver
bandwidth from narrow
to wide or vice versa.
Comm Memory
Page NOTE
COMMUNICATIONS
Flight Crew Operating Manual Rev 3, Apr 25, 2005
CSP 700−5000−6
Volume 2
06−10−20
HIGH FREQUENCY (HF) COMMUNICATION SYSTEM
The HF communication system is a dual configuration integrated with the radio system on the
airplane. The system provides long range airtoair
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
Bombardier_Global_000-Communications(7)
