曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
value in the originating Mode S CALL REQUEST by GDLP
packet shall be returned to the GDLP along with the channel 5.2.5.2.4.1.2 Data packet type (DP). This fieId shall be
number (CH) assigned by the ADLP. set to 0.
5.2.5.2.3.1.7 Channel number (CH). The field shall be 5.2.5.2.4.1.3 MSP packet type (MP).T his field shall be
set equal to the channel number assigned by the ADLP as ""
determined during the CALL REQUEST procedures for the 5.2.5.2.4.1.4 Supervisory packet (SP). This field shall be
Mode S connection.
set to 1.
5.2.5.2.3.1.8 Address, mobile and address, ground. The 5.2.5.2.4.1.5 Supervisoty type (ST). This field shall be
AM and AG values in the originating Mode S CALL set to 1.
REQUEST by GDLP packet shall be returned in these fields.
When present, DTE addresses in the IS0 8208 CALL 5.2.5.2.4.1.6 Address, mobile and address, ground. The
ACCEFT packet shall be ignored. AM and AG values in the originating Mode S CALL
REQUEST by ADLP packet shall be returned in these fields,
When present, DTE addresses in the IS0 8208 CALL
5.2.5.2.3.2 Translariorz into IS0 8208 packets ACCEPT packet shall be ignored.
5.2.5.2.3.2.1 Translation. Reception by the GDLP
reformatting process of a Mode S CALL ACCEFT by ADLP
packet (or an S-bit sequence of packets) from the GDCE shall
result in the generation of a corresponding IS0 8208 CALL
ACCEPT packet to the local DCE. The translation from the
Mode S packet to the IS0 8208 packet shall be the inverse of
the processing defined in 5.2.5.2.3.1 with the exceptions as
specified in the following paragraph.
5.2.5.2.3.2.2 Culled DTE, callirtg DTE address and
length jields. Where present, the called DTE address shall be
composed of the aircraft address and the value contained in
the AM field of the Mode S packet, converted to 1 3 0
(5.2.3.1.3.2). Where present, the calling DTE address shall be
5.2.5.2.4.2 Translation into IS0 8208 packets
5.2.5.2.4.2.1 Translation. Reception by the ADLP
reformatting process d a Mode S CALL ACCEPT by GDLP
packet (or an S-bit sequence of packets) from the ADCE shall
result in the generation of a corresponding IS0 8208 CALL
ACCEPT packet to the local DCE. The translation from the
Mode S packet to the IS0 8208 packet shaIl be the inverse of
the processing defined in 5.2.5.2.4.1 with the exceptions as
specified in the following paragraph.
5.2.5.2.4.2.2 Called DTE, calling DTE address and
length jields. Whcre present, the calling DTE address shall be
Annex 10 - Aeronautical Telecommunications Volume III
composed of the aircraft address and the value contained in
the AM field of the Mode S packet, converted to BCD
(5.2.3.1.3.2). Where present, the called DTE address shall be
the ground DTE address contained in the AG field of the
Mode S packet, converted to BCD. The length field shall be
as defined in IS0 8208,
Note.- The called and calling DTE addresses are optional
in the corresponding IS0 8208 packet and are not required
for correct operation of the Mode S subnetwork.
5.2.5.2.5 CLEAR REQUEST BY ADLP
5.2.5.2.5.1 Translatian into Mode S packet^
5.2.5.2.5.1.1 Translated packetfommt. Reception by the
ADLP reformatting process of an I S 0 8208 CLEAR
REQUEST packet from the local DCE shall result in the
generation of a corresponding Mode S CLEAR REQUEST by
ADLP packet(s) (as determined by S-bit processing
(5.2.5.1.4.2)) as follows:
Fields shown in the packet format and not specified in the
following paragraphs shall be set as specified in 5.2.5.2.1 and
5.2.5.2.5.1.2 Data packet type (DP). This field shall be
set to 0.
5.2.5.2.5.2 Translation into IS0 8208 packets
5.2.5.2.5.2.1 Translation. Reception by the GDLP
reformatting process of a Mode S CLEAR REQUEST by
ADLP packet (or an S-bit sequence of packets) from the local
GDCE shall result in the generation of a corresponding IS0
8208 CLEAR REQUEST packet to the local DCE. The translation
from the Mode S packet to the IS0 8208 packet shall be
the inverse of the processing defined in 5.2.5.2.5.1 with the
exceptions specified in the following paragraphs.
5.2.5.2.5.2.2 Called DTE, calling DTE and length$elds.
These fields shall be omitted in the IS0 8208 CLEAR
REQUEST packet.
5.2.5.2.5.2.3 Clearing Cause Field. This field shall be
set taking account of 5.2.6.3.3.
5.2.5.2.6 CLEAR REQUEST BY GDLP
5.2.5.2.6.1 Translation i~ttoM ode S packets
5.2.5.2.6.1.1 Translatedpacketfomzot. Reception by the
GDLP reformatting process of an IS0 8208 CLEAR
REQUEST packet from the local DCE shall rcsult in the
generation of corresponding Mode S CLEAR REQUEST by
GDLP packet(s) (as determined by S-bit processing
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
附件10--航空电信an10_v3_1ed_amend_73(18)
